Virgin BB 100 - 120 MB.red quality monitor

Whats happening here?

http://www.thinkbroadband.com/ping/share/2a0e22eab8e...

Your router isn't responding to ping.

Ok.. Virgin superhub, nothing changed? unless they have pushed an update or i am now 120mb without being told?

Firewall Features Enable
Ipsec PassThrough Enable
PPTP PassThrough Enable
Multicast Enable
Port Scan Detection Enable
IP Flood Detection Enable
Web Features
Filter Proxy Enable
Filter Cookies Enable
Filter Java Applets Enable
Filter ActiveX Enable
Filter Popup Windows Enable
Block Fragmented IP Packets Enable

Dunno, but google found this http://community.virginmedia.com/t5/Up-to-50Mb-broad...

Your IP address has changed, move the monitor to the new one.

You haven't been upgraded, that's not happening until summer.

either ur ip address has changed or its not repsonding to the wan ping. u can try creating a new graph or the other way i found to get it working again if u have the same ip is just to restore the superhub to factory settings.

a lil tip for u aswell... turn off router firewall and ip flood detection to increase performance.

VM seem or who ever made the firmware put it in an odd place

you need to go to the DMZ page (its at the bottom of the list on the right somewhere) just tick or un-tick the [respond to Ping] box and press submit (do not mess with the DMZ number IP Leave it at 0 unless you want to open your pc up to attacks)

untick all the firewall options as it can make the router degrade or crash under heavy load if they are enabled, (you can leave IPsec stuff ticked)

Edited by leexgx (Sun 18-Mar-12 04:54:11)

Thanks all, will try later. I have been creating new monitors from home IP and i have also located the Respond to Ping which i did notice was in a rather silly place, DMZ??

DMZ port forwards every port to the IP you put in, so its an security risk if you set it to an computer (think the default is 0 or empty) why its best not to be messed with it unless you have an good reason to use it

once you have ticked the respond to ping you should be able to see ping's on the Quality Monitor within 1-2 minuets