General Discussion
  >> Broadband Quality Monitor


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User shinerweb
(regular) Thu 16-Apr-15 10:23:51
Print Post

Plusnet supplied Sagemcom F@ST 1704N


[link to this post]
 
Has anyone worked out how to enable ping / ICMP for the new Plusnet Sagemcom F@ST 1704N modem/router ?

I found a few references online but no solid instructions that have worked with the installed version of firmware (modified for PN ??).

For those interested (and to create another link for peoples), to gain entry to more advanced settings, visit the main router page and log in (usually via http://192.168.1.254 as factory supplied, and then visit http://192.168.1.254/expert_user.html

--
About Me | PlusNet ADSL2

Edited by shinerweb (Thu 16-Apr-15 13:10:52)

Standard User Gus
(newbie) Fri 08-May-15 11:23:48
Print Post

Re: Plusnet supplied Sagemcom F@ST 1704N


[re: shinerweb] [link to this post]
 
From what I read on plusnets forum, its locked in the firmware as a security risk so isn't possible to enable. So unless it gets new firmware you can't use the quality monitor unless you put a pc into DMZ and make its software firewall allow pings.
  Print Thread

Jump to