User comments on ISPs
  >> BT Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | (show all)   Print Thread
Standard User DooGie
(experienced) Wed 16-Mar-16 20:57:36
Print Post

New firmware for HH5A


[link to this post]
 
Sorry if this has been posted before but I was just looking at the Boot Log of my HH5A and noticed a firmware update on 23rd February.

Previous firmware 4.7.5.1.83.8.204.1.11 (Type A)

New firmware 4.7.5.1.83.8.222.1.1 (Type A)

Anyone else noticed this?

Freeserve > Pipex > ADSL24 > COMS > BT Infinity 2
Standard User BatBoy
(sensei) Wed 16-Mar-16 21:19:52
Print Post

Re: New firmware for HH5A


[re: DooGie] [link to this post]
 
Still doesn't support G.INP

Use the Ginp Formula to determine if your vdsl2 connection is with or without G.INP.
Divide your IP Profile by your Sync Speed and the answer is 0.9669 (with) or 0.9679 (without)
Standard User DooGie
(experienced) Wed 16-Mar-16 21:57:53
Print Post

Re: New firmware for HH5A


[re: BatBoy] [link to this post]
 
In reply to a post by BatBoy:
Still doesn't support G.INP


True. However that doesn't concern me as after the cabinet I'm connected to was G.INP enabled I suffered a drop in speeds.After a post on the BT forum about this BT contacted me asking if I would take part in a trial. I agreed and within 3 days my speed was back up to what it was before.

Currently my average down speed is 74 Mbps and upload 18 Mbps, so I really can't complain.

Freeserve > Pipex > ADSL24 > COMS > BT Infinity 2


Register (or login) on our website and you will not see this ad.

Standard User BatBoy
(sensei) Wed 16-Mar-16 22:13:33
Print Post

Re: New firmware for HH5A


[re: DooGie] [link to this post]
 
Yeah, that sounds like G.INP on an unsupported modem alright.

Use the Ginp Formula to determine if your vdsl2 connection is with or without G.INP.
Divide your IP Profile by your Sync Speed and the answer is 0.9669 (with) or 0.9679 (without)
Standard User Alnath
(fountain of knowledge) Thu 17-Mar-16 11:39:14
Print Post

Re: New firmware for HH5A


[re: DooGie] [link to this post]
 
In reply to a post by DooGie:
Sorry if this has been posted before but I was just looking at the Boot Log of my HH5A and noticed a firmware update on 23rd February.

Previous firmware 4.7.5.1.83.8.204.1.11 (Type A)

New firmware 4.7.5.1.83.8.222.1.1 (Type A)

Anyone else noticed this?


Anything obviously different DooGie?
Standard User DooGie
(experienced) Thu 17-Mar-16 19:51:46
Print Post

Re: New firmware for HH5A


[re: Alnath] [link to this post]
 
In reply to a post by Alnath:
In reply to a post by DooGie:
Sorry if this has been posted before but I was just looking at the Boot Log of my HH5A and noticed a firmware update on 23rd February.

Previous firmware 4.7.5.1.83.8.204.1.11 (Type A)

New firmware 4.7.5.1.83.8.222.1.1 (Type A)

Anyone else noticed this?


Anything obviously different DooGie?


Not noticed any difference at all.

I'm just pleased it hasn't messed anything up smile

Freeserve > Pipex > ADSL24 > COMS > BT Infinity 2
Standard User Al1264
(member) Fri 18-Mar-16 11:35:10
Print Post

Re: New firmware for HH5A


[re: BatBoy] [link to this post]
 
In reply to a post by BatBoy:
Still doesn't support G.INP


Opinion stated as fact yet again by this poster.

Correct facts:
Not known/proven to fully support G.INP
Generally believed / accepted not to support upstream G.INP
May support downstream G.INP

My own experience suggests that it does support downstream G.INP but the evidence is empirical so I am not stating this as known fact.

Edited by Al1264 (Fri 18-Mar-16 11:39:01)

Standard User mlmclaren
(knowledge is power) Fri 18-Mar-16 11:46:08
Print Post

Re: New firmware for HH5A


[re: Al1264] [link to this post]
 
Yes, agreed....

Not quiet sure why the obsession with stating G.INP isn't supported on this device or the even implying that BT's equipment is compliant with SIN 498 which if unfamiliar requires CP Equipment to be complient with 'Downstream' G.INP but remains optional on Upstream...

BTInfinity - 79999/19999kbps - Quality Monitor - Quality Monitor 2
VirginMedia - 77000/5250kbps - BQM L1 - BQM L2
Standard User BatBoy
(sensei) Fri 18-Mar-16 11:53:12
Print Post

Re: New firmware for HH5A


[re: Al1264] [link to this post]
 
In reply to a post by Al1264:
In reply to a post by BatBoy:
Still doesn't support G.INP


Opinion stated as fact yet again by this poster.

Correct facts:
Not known/proven to fully support G.INP
Generally believed / accepted not to support upstream G.INP
May support downstream G.INP

My own experience suggests that it does support downstream G.INP but the evidence is empirical so I am not stating this as known fact.
Well you can prove it for yourself as it says in my sig:
Use the Ginp Formula to determine if your vdsl2 connection is with or without G.INP.
Divide your IP Profile by your Sync Speed and the answer is 0.9669 (with) or 0.9679 (without)


Use the Ginp Formula to determine if your vdsl2 connection is with or without G.INP.
Divide your IP Profile by your Sync Speed and the answer is 0.9669 (with) or 0.9679 (without)
Standard User ian72
(eat-sleep-adslguide) Fri 18-Mar-16 11:57:26
Print Post

Re: New firmware for HH5A


[re: BatBoy] [link to this post]
 
You have proven in the past that your HH5A does not support G.INP on your line. Others seem to have evidence that their HH5A does support G.INP on their line.
Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | (show all)   Print Thread

Jump to