Pavement chambers can be problematic e.g. if its an area with expensive paving slabs the council may object to the 1m x 2m chamber covers
This is true, however we have tarmac so shouldn't be an issue, one thing I have noticed is that they have removed the railings along the road, so now all we need is for a driver to just loose control of their car and run over the cabinet.
FTTP kit for those who want to wish http://www.coolwebhome.co.uk/fibre-milton-keynes/
That slide show looked nice.
Where would you see that enclosure with the wafers with the fibre in them (IMG_4341)?
Is that a similar to the one hanging on the rack below?
Also IMG_4356, IMG_4358, IMG_4362 looks like the fibre splicer and joiner, a lot more easier now with all the tools, all we had 20+ years back when we was using fibre was a blade (Stanley Knife), cleaning fluid (washing up liquid), microscope and a polishing block, and some smelly glue in a tube or the thermal joiner.
Make me laugh even thinking about the old days LOL
http://www.coolwebhome.co.uk/fibre-milton-keynes/wgc... a good pic of what goes into a chamber for FTTP
I think we had that small clamped enclosure in the pit I think is for the phone lines, and something like the one hanging on the rack, but not sure only saw it the once at a glance while talking to the engineer and was also 2 to 3 years ago.
Also to the left it looks like the coke bottle enclosure, so I gather no pole there then or they are just getting it all ready for the pole.
The coke bottle http://www.coolwebhome.co.uk/fibre-milton-keynes/wgc... with one fibre leaving it in this example.
Yup that's the one we have up the pole, sadly ours have no cables yet coming out the top, but there are the upper end of our road.