General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User KayCee
(experienced) Fri 13-Apr-12 10:10:14
Print Post

Hacked HG612


[link to this post]
 
Morning all

just to check Im not doing something wrong , am I right in thinking that once it's hacked and the new firmware is being used you still need to do the modify your ip on the adapter and connect directly to LAN 2 to get the stats ?

Thanks
Standard User BatBoy
(legend) Fri 13-Apr-12 10:12:56
Print Post

Re: Hacked HG612


[re: KayCee] [link to this post]
 
Yes, unless you turn on the DHCP in the (now) router.


_____________________________________________________________________________________________ this is not usenet __________________
Standard User KayCee
(experienced) Fri 13-Apr-12 10:31:23
Print Post

Re: Hacked HG612


[re: BatBoy] [link to this post]
 
Thank you !

on a side note , is this to small to be my FTTC Cab ?

http://maps.google.co.uk/maps?q=al3+4ay&hl=en&ll=51....


Register (or login) on our website and you will not see this ad.

Standard User lee111s
(regular) Fri 13-Apr-12 10:38:21
Print Post

Re: Hacked HG612


[re: KayCee] [link to this post]
 
That's not an FTTC cab.
Standard User BatBoy
(legend) Fri 13-Apr-12 10:40:38
Print Post

Re: Hacked HG612


[re: KayCee] [link to this post]
 
Yes, it's too old as well.


_____________________________________________________________________________________________ this is not usenet __________________
Standard User KayCee
(experienced) Fri 13-Apr-12 10:41:54
Print Post

Re: Hacked HG612


[re: BatBoy] [link to this post]
 
Thought as much , wonder where mine is then !!
Standard User Bald_Eagle1
(committed) Fri 13-Apr-12 11:44:41
Print Post

Re: Hacked HG612


[re: KayCee] [link to this post]
 
In reply to a post by KayCee:
just to check Im not doing something wrong , am I right in thinking that once it's hacked and the new firmware is being used you still need to do the modify your ip on the adapter and connect directly to LAN 2 to get the stats ?


If you are using a router, an ethernet cable can be run from a spare router LAN port to the modem's LAN2 port, along with the usual ethernet cable from the router's WAN port to the modem's LAN1 port.

You would then have normal internet access via the modem's LAN1 port & also access via the router to the modem's stats.

That saves having to keep swapping cables from the modem's LAN1 & LAN2 ports.
Standard User KayCee
(experienced) Fri 13-Apr-12 11:45:44
Print Post

Re: Hacked HG612


[re: Bald_Eagle1] [link to this post]
 
Ahh cool , Im using a switch with a spare port , so will give that a go !
  Print Thread

Jump to