General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | (show all)   Print Thread
Standard User Oddball
(fountain of knowledge) Fri 11-Oct-13 16:40:51
Print Post

Locked out of web interface on HG612 (can telnet though)


[link to this post]
 
I seem to be locked out of the web interface on my (firmware modded) HG612. I have tested on a PC and a laptop. I can telnet in, ping and stats from Ronski is working fine. I just cannot get the webpage(s) up.

I used to have access just fine but lost my network settings. They should be 192.168.100, default subnet and 192.168.1.1 default gate way from memory. The fact I have ping and telenet to 192.168.1.1 means it must be correct?

Short of a reboot of the modem does anyone have any ideas how I get webpage access back?

---
What's my speed? Who knows thanks to DLM! Plusnet FTTC. Openreach are pants!
Standard User panda
(committed) Fri 11-Oct-13 16:48:20
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: Oddball] [link to this post]
 
Openreach have remotely updated the firmware and the web interface is no longer available.
You can either unlock it again - reverting back to the earlier firmware (and try and prevent Openreach from updating it again), manage without the GUI or wait to see if an unlocked version becomes available.

Eats shoots and leaves.
Standard User Chrysalis
(legend) Fri 11-Oct-13 16:48:39
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: Oddball] [link to this post]
 
I think you going to need to reboot unless anyone knows a way in telnet to just restart the httpd daemon.

BT Infinity 2 Since Dec 2012 - BQM


Register (or login) on our website and you will not see this ad.

Standard User Chrysalis
(legend) Fri 11-Oct-13 16:49:25
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: panda] [link to this post]
 
In reply to a post by panda:
Openreach have remotely updated the firmware and the web interface is no longer available.
You can either unlock it again - reverting back to the earlier firmware (and try and prevent Openreach from updating it again), manage without the GUI or wait to see if an unlocked version becomes available.


is news to me O_o

when this happen?

I goes those of us who disabled the remote access function skipped the firmware update.

BT Infinity 2 Since Dec 2012 - BQM
Standard User panda
(committed) Fri 11-Oct-13 16:59:44
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: Chrysalis] [link to this post]
 
In reply to a post by Chrysalis:
when this happen?
First seen a couple of days ago
In reply to a post by Chrysalis:
I goes those of us who disabled the remote access function skipped the firmware update.
I would guess so, although to be fair it isn't 'locked down' as such with the update, just that the web interface is no longer available. Telnet is still available, so some reporting tools still work.

I get a slightly better sync (and seemingly more stable too) with this update. I didn't really use the GUI anyway so it's no great loss for me. YMMV.

Eats shoots and leaves.
Standard User kasg
(fountain of knowledge) Fri 11-Oct-13 17:35:53
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: Chrysalis] [link to this post]
 
In reply to a post by Chrysalis:
I goes those of us who disabled the remote access function skipped the firmware update.

I think I disabled it, I certainly haven't been updated. I'm surprised there are not more posts about this.

Kevin

plusnet Unlimited Fibre - BQM
Using OpenDNS
Domains and web hosting with TSOHOST

Edited by kasg (Fri 11-Oct-13 17:36:27)

Standard User Stevenage_Neil
(member) Fri 11-Oct-13 17:39:13
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: panda] [link to this post]
 
In reply to a post by panda:
..and seemingly more stable too.....


When did this update appear?
Standard User ryant704
(member) Fri 11-Oct-13 18:05:30
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: kasg] [link to this post]
 
Did you disable with a kill command or through the GUI?

It doesn't actually deactivate it through the GUI but it does with a kill command through telnet.

There are a good majority of threads on another forum board.

Edited by ryant704 (Fri 11-Oct-13 18:06:00)

Standard User David_W
(fountain of knowledge) Fri 11-Oct-13 18:06:03
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: Stevenage_Neil] [link to this post]
 
In reply to a post by Stevenage_Neil:
When did this update appear?
I believe the updates are being carried out in phases. My logs show a drop at 0220 on October 9 (Wednesday). Since then, the first hop latency has been ever so slightly less.

My modem isn't unlocked, so I have no way of checking the firmware version number.

Standard User kasg
(fountain of knowledge) Fri 11-Oct-13 18:09:30
Print Post

Re: Locked out of web interface on HG612 (can telnet though)


[re: ryant704] [link to this post]
 
In reply to a post by ryant704:
Did you disable with a kill command or through the GUI?

I thought I'd done it through the GUI, but from what you say, it seems not.
In reply to a post by ryant704:
There are a good majority of threads on another forum board.

Do you have a link, if that's allowed?

Kevin

plusnet Unlimited Fibre - BQM
Using OpenDNS
Domains and web hosting with TSOHOST
Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | (show all)   Print Thread

Jump to