General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | (show all)   Print Thread
Standard User BatBoy
(legend) Mon 19-May-14 08:31:09
Print Post

fttc-check.alc.im updated


[link to this post]
 
I see http://fttc-check.alc.im/ has been updated with data for April 2014
wink


______________________________________________________________________________________False_Authority_Syndrome__________________
Standard User AndyPandy
(experienced) Mon 19-May-14 09:20:03
Print Post

Re: fttc-check.alc.im updated


[re: BatBoy] [link to this post]
 
I checked this out, and it identified my cabinet (there are 2 that serve the postcode) and it was nice to see the uplift, I hope it's true when fibre finally arrives!

The SamKnows link however goes to Leicester Central Exchange, which is nowhere near me... smile

Cheers,
AP


ZeN Office
Fritz!Box 3390
Standard User tialaramex
(newbie) Mon 19-May-14 11:50:18
Print Post

Re: fttc-check.alc.im updated


[re: BatBoy] [link to this post]
 
How does it decide which postcodes are "valid"? It rejects SO17 1ST even though Google and other sites seem content with that and so does the Openreach checker.

I put a few postcodes of properties that I know are served by a cabinet that's got a twin, but don't get FTTC yet (shown as blue on my map) and they all show as May 31st. Which is probably a placeholder but hey.


Register (or login) on our website and you will not see this ad.

Standard User Irby
(fountain of knowledge) Mon 19-May-14 12:01:49
Print Post

Re: fttc-check.alc.im updated


[re: tialaramex] [link to this post]
 
In reply to a post by tialaramex:
How does it decide which postcodes are "valid"? It rejects SO17 1ST


You put a space in. Works fine without space.
Standard User hippyharry
(regular) Mon 19-May-14 14:45:32
Print Post

Re: fttc-check.alc.im updated


[re: Irby] [link to this post]
 
Great to see it was updated by Adam. I checked my PCP which isn't part of the 66% deployment, but it has gave me an uplift of 19.76. Interesting for it to return that value when no work is scheduled for it.
Standard User max360
(newbie) Mon 19-May-14 17:00:26
Print Post

Re: fttc-check.alc.im updated


[re: BatBoy] [link to this post]
 
My post code shows as follows:

Cabinet (PCP) No. Cabinet Vendor Probability Uplift Phase Deployment Date Status
24 99% 13.92 Not being deployed as part of the 66% Commercial Plan




What does 99% Probability means?

Thanks,
Administrator MrSaffron
(staff) Mon 19-May-14 17:11:05
Print Post

Re: fttc-check.alc.im updated


[re: max360] [link to this post]
 
99% probability that the postcode you gave matches this cabinet, postcodes are often split between two cabinets

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User tialaramex
(newbie) Mon 19-May-14 17:12:17
Print Post

Re: fttc-check.alc.im updated


[re: Irby] [link to this post]
 
In reply to a post by Irby:
You put a space in. Works fine without space.


Now it works with or without a space. But when I wrote that neither worked. So either a coincidence or somebody is quietly fixing things based on feedback here.
Standard User Irby
(fountain of knowledge) Mon 19-May-14 17:36:57
Print Post

Re: fttc-check.alc.im updated


[re: tialaramex] [link to this post]
 
In reply to a post by tialaramex:
In reply to a post by Irby:
You put a space in. Works fine without space.


Now it works with or without a space. But when I wrote that neither worked. So either a coincidence or somebody is quietly fixing things based on feedback here.


Possibly, but the site does say "Enter postcode (no spaces)"
Standard User Ignitionnet
(knowledge is power) Mon 19-May-14 20:04:16
Print Post

Re: fttc-check.alc.im updated


[re: BatBoy] [link to this post]
 
Must get hold of that spreadsheet.

Uplift for this cabinet 117.61. Not too shabby and explains a bit...

Edited by Ignitionnet (Mon 19-May-14 20:04:43)

Pages in this thread: 1 | 2 | 3 | 4 | (show all)   Print Thread

Jump to