General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User jward2503
(learned) Wed 04-Mar-15 18:34:07
Print Post

eo Fibre broadband


[link to this post]
 
Hello, been on a exchange only line until toda,y looked on the checker and now says im served by cabinet 3, also there is a fibre cab next to it, how long will it take to activate fibre now it is showing a cabinet number?
Standard User godsell4
(regular) Wed 04-Mar-15 23:14:23
Print Post

Re: eo Fibre broadband


[re: jward2503] [link to this post]
 
it can be weeks or months, our whole village was EO until cabinets were installed in early October, still waiting for the cabinets to go live. It is amazing just how many little things can hinder the process.

Contact you local council if they were installed as part of BDUK to find out details.

PlusNet BBYW1
Standard User kitcat
(committed) Thu 05-Mar-15 12:21:41
Print Post

Re: eo Fibre broadband


[re: jward2503] [link to this post]
 
Is the exchange got working Cabs on it already ?

If so it can be only days. This is because they don't move people to the copper cab until they are nearly ready to go live.

Keep checking at regular intervals, Days? or if you get bored weeks.

Make your mind up who to go with while you wait so you can order as soon as it shows as available.


Register (or login) on our website and you will not see this ad.

Standard User FredTheB
(regular) Thu 05-Mar-15 15:34:19
Print Post

Re: eo Fibre broadband


[re: jward2503] [link to this post]
 
Postcode?
Standard User jward2503
(learned) Thu 05-Mar-15 17:32:41
Print Post

Re: eo Fibre broadband


[re: FredTheB] [link to this post]
 
@fredtheb yes the cab is working it just started showing cabinet 3 on the adsl checker also my postcode is yo176xh
Standard User PaulKirby
(committed) Thu 05-Mar-15 21:15:09
Print Post

Re: eo Fibre broadband


[re: jward2503] [link to this post]
 
In reply to a post by jward2503:
@fredtheb yes the cab is working it just started showing cabinet 3 on the adsl checker also my postcode is yo176xh
Yeah, EO Block 5 has been moved over to PCP Cabinet 3 and should be active now.
Exchange Name: Kirby Misperton
Exchange Code: MYKMP
County: North Yorkshire

Cabinet: EO -> P3
Fibre Phase: BDUK NYNET 11b
Fibre Information: FTTC Planned (exchange ready 22nd March 2013)
Result Count: 11

[YO17 6XH]
Has 11 result(s) connected to Cabinet 3 with ADSLx with approximate speeds around the following:
ADSLx (Worst): Up to 7.5 (downstream rate) -- (upsrteam rate) 6.5 to 8.0 (downstream range)
ADSLx (Best): Up to 7.5 (downstream rate) -- (upsrteam rate) 6.5 to 8.0 (downstream range)

Please note that these speeds are using BT's DSL Checker and uses the lowest and highest values for that postcode and cabinet.
Had at least 1 issue retrieving information from the BT DSL Checker.
As for fibre I have no clue apart from what is displayed above.

Paul
Standard User jward2503
(learned) Thu 05-Mar-15 22:14:52
Print Post

Re: eo Fibre broadband


[re: PaulKirby] [link to this post]
 
Thank you
Standard User WWWombat
(knowledge is power) Fri 06-Mar-15 15:21:42
Print Post

Re: eo Fibre broadband


[re: PaulKirby] [link to this post]
 
How do you figure out this part?
In reply to a post by PaulKirby:
Yeah, EO Block 5 has been moved over to PCP Cabinet 3 and should be active now.

Cabinet: EO -> P3


I know your normal sources, but I haven't yet worked out how to equate which particular EO bundles have been moved over, and whether a new PCP has been installed for the purpose of taking over some/all EO lines.

I'm also not convinced that cab 3 is active yet.
Standard User PaulKirby
(committed) Fri 06-Mar-15 20:55:06
Print Post

Re: eo Fibre broadband


[re: WWWombat] [link to this post]
 
In reply to a post by WWWombat:
How do you figure out this part?
In reply to a post by PaulKirby:
Yeah, EO Block 5 has been moved over to PCP Cabinet 3 and should be active now.
Cabinet: EO -> P3
I know your normal sources, but I haven't yet worked out how to equate which particular EO bundles have been moved over, and whether a new PCP has been installed for the purpose of taking over some/all EO lines.

I'm also not convinced that cab 3 is active yet.
When it says a postcode is 100% for a set cabinet as well as 100% for an exchange only in my eyes it means they will be moving to that cabinet.

It also helps when I do a complete speed check for all addresses for each postcode where it tells me the cabinet, so it confirms the move.

Also the info I display (i.e. the values) are all from BT's DSL Checker I just format it to be more nice and easy to read, so if it says they are on cabinet X then they are active, or the DSL checker is wrong.

But like I said in my post, I have no clue when that cabinet will get fibre.

Paul
Standard User jward2503
(learned) Sat 07-Mar-15 22:54:53
Print Post

Re: eo Fibre broadband


[re: PaulKirby] [link to this post]
 
cab 3 is active when i put my number in the adsl checker is shows cabinet 3
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to