Your answer is completely correct. However, in our case all of the lines that are connected to our cabinet for copper have now got FTTP as an option. So either ADSL2 via copper and /or FTTP via fibre.
Sadly its FTTC and not FTTP for the postcode (AB25 3XU) that you supplied in your original post.
Any way I did a check on all homes for that postcode and have the following:
Exchange Name: Aberdeen Denburn
Exchange Code: NSDEN
Fibre Phase: Phase 07b 2011-2012
Fibre Information: FTTC Available from 18th March 2012
Result Count: 33
• Has 33 result(s) connected to Cabinet 83 with FTTC with approximate speeds around the following:
• Range A: 72.0 -> 80.0 (downstream) 20.0 -> 20.0 (upstream)
• Range B: 61.9 -> 80.0 (downstream) 12.2 -> 20.0 (upstream)
Please note that these speeds are using BT's DSL Checker and uses the lowest and highest values for that postcode and cabinet.
† Had at least 1 issue retrieving information from the BT DSL Checker.
You can either get ADSL2+ from 8.5 to 19 Mbps or FTTC, there is no mention of FTTP for that postcode on cabinet 83.
I also have the individual FTTC speeds for each of the homes for that postcode if need be.