General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | 7 | (show all)   Print Thread
Standard User spireites2008
(newbie) Mon 13-Apr-15 11:54:59
Print Post

HG612 is worse?


[link to this post]
 
Hi, like others I was using a ECI modem for ages without issues (My sync was always 40000 on a 40mb package). Then g.inp arrived and I lost some speed, again like other people. It went down to 35xxx iirc. So I bought a HG612 on eBay as this seemed to help others, but it seems worse to me, except pings which went down to 12ms although seemed to go up to 13ms just a few minutes ago. Now my sync is 31xxx although upload is almost perfect (9989 - I have 10mb upload max package on sky)

I flashed it with SP08 firmware following instructions etc. I can't post stats right now, have to go out for a few hours. Cheers for any help.
Standard User spireites2008
(newbie) Mon 13-Apr-15 14:08:46
Print Post

Re: HG612 is worse?


[re: spireites2008] [link to this post]
 
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 10651 Kbps, Downstream rate = 54112 Kbps
Bearer: 0, Upstream rate = 10000 Kbps, Downstream rate = 32400 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 14.5 6.2
Attn(dB): 20.0 0.0
Pwr(dBm): 13.0 7.2


Is 20dB attn high? Maybe it's SNR, the 192.168.1.1 page says so anyway.

Edited by spireites2008 (Mon 13-Apr-15 14:11:04)

Standard User mlmclaren
(experienced) Mon 13-Apr-15 14:13:12
Print Post

Re: HG612 is worse?


[re: spireites2008] [link to this post]
 
can you post the rest of the results from that command please... mine looks like this

# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 25739 Kbps, Downstream rate = 65916 Kbps
Bearer: 0, Upstream rate = 20000 Kbps, Downstream rate = 66210 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.3 9.4
Attn(dB): 16.4 0.0
Pwr(dBm): 13.6 7.1
VDSL2 framing
Bearer 0
MSGc: -6 -6
B: 243 97
M: 1 1
T: 0 0
R: 10 8
S: 0.1173 0.1554
L: 17316 5457
D: 8 8
I: 254 106
N: 254 106
Q: 8 8
V: 0 2
RxQueue: 54 39
TxQueue: 18 13
G.INP Framing: 18 18
G.INP lookback: 18 13
RRC bits: 24 24
Bearer 1
MSGc: 154 58
B: 0 0
M: 2 2
T: 2 2
R: 16 16
S: 6.4000 16.0000
L: 40 16
D: 3 1
I: 32 32
N: 32 32
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 0
OHFErr: 0 0
RS: 596809136 1464403
RSCorr: 66 20
RSUnCorr: 0 0
Bearer 1
OHF: 1094349 49996
OHFErr: 0 0
RS: 10942879 99321
RSCorr: 1 28
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 7336 52
rtx_c: 69 4896
rtx_uc: 0 647

G.INP Counters
LEFTRS: 0 59
minEFTR: 66201 19997
errFreeBits: 17751543 620666946

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 2238127197 0
Data Cells: 19242979 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 0 0
SES: 0 0
UAS: 23 23
AS: 17578

Bearer 0
INP: 49.00 47.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 0.00
OR: 0.01 0.01
AgR: 66278.17 20102.08

Bearer 1
INP: 4.50 4.00
INPRein: 4.50 4.00
delay: 3 0
PER: 16.06 16.06
OR: 79.68 31.87
AgR: 79.68 31.87

Bitswap: 2684/2684 307/307


Plusnet Unlimited 21CN 4200/800 @ 4.2Km > TP-Link TD-W8968v3 - BQM IPv4
Plusnet Fibre Extra 66000/20000 @ 450m > HG612 (Unlocked) > Linksys LRT224 - BQM IPv4


Register (or login) on our website and you will not see this ad.

Standard User spireites2008
(newbie) Mon 13-Apr-15 14:21:15
Print Post

Re: HG612 is worse?


[re: mlmclaren] [link to this post]
 
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 10651 Kbps, Downstream rate = 54112 Kbps
Bearer: 0, Upstream rate = 10000 Kbps, Downstream rate = 32400 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 14.5 6.2
Attn(dB): 20.0 0.0
Pwr(dBm): 13.0 7.2
VDSL2 framing
Bearer 0
MSGc: -6 -6
B: 130 97
M: 1 1
T: 0 0
R: 16 14
S: 0.1279 0.3108
L: 9195 2883
D: 4 8
I: 147 112
N: 147 112
Q: 4 8
V: 2 2
RxQueue: 136 20
TxQueue: 34 10
G.INP Framing: 18 18
G.INP lookback: 31 10
RRC bits: 24 24
Bearer 1
MSGc: 90 58
B: 0 0
M: 2 2
T: 2 2
R: 16 16
S: 10.6667 16.0000
L: 24 16
D: 1 1
I: 32 32
N: 32 32
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 0
OHFErr: 0 0
RS: 268296660 3478280
RSCorr: 416 540
RSUnCorr: 0 0
Bearer 1
OHF: 536217 538327
OHFErr: 0 0
RS: 3216934 2153311
RSCorr: 0 13
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 8473306 33
rtx_c: 37 9772
rtx_uc: 0 0

G.INP Counters
LEFTRS: 0 244
minEFTR: 32395 10001
errFreeBits: 4254822 39542724

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 536639645 0
Data Cells: 7558363 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 0 0
SES: 0 0
UAS: 23 23
AS: 8614

Bearer 0
INP: 51.00 47.00
INPRein: 1.00 0.00
delay: 0 0
PER: 0.00 0.00
OR: 0.01 0.01
AgR: 32649.19 10051.23

Bearer 1
INP: 2.50 4.00
INPRein: 2.50 4.00
delay: 0 0
PER: 16.06 16.06
OR: 47.81 31.87
AgR: 47.81 31.87

Bitswap: 3323/3323 56/56
Standard User mlmclaren
(experienced) Mon 13-Apr-15 14:33:18
Print Post

Re: HG612 is worse?


[re: spireites2008] [link to this post]
 
How long have you had the modem connected?

You might need to leave it connected for a few days so that DLM can change the line as required.

Plusnet Unlimited 21CN 4200/800 @ 4.2Km > TP-Link TD-W8968v3 - BQM IPv4
Plusnet Fibre Extra 66000/20000 @ 450m > HG612 (Unlocked) > Linksys LRT224 - BQM IPv4
Standard User spireites2008
(newbie) Mon 13-Apr-15 14:35:43
Print Post

Re: HG612 is worse?


[re: mlmclaren] [link to this post]
 
Since Friday the 10th April. Guess I'll play the waiting game, thanks anyway.
Standard User mlmclaren
(experienced) Mon 13-Apr-15 14:38:50
Print Post

Re: HG612 is worse?


[re: spireites2008] [link to this post]
 
I've just noticed your on Sky, may I ask what router you use with your connection?

Plusnet Unlimited 21CN 4200/800 @ 4.2Km > TP-Link TD-W8968v3 - BQM IPv4
Plusnet Fibre Extra 66000/20000 @ 450m > HG612 (Unlocked) > Linksys LRT224 - BQM IPv4
Standard User spireites2008
(newbie) Mon 13-Apr-15 15:00:29
Print Post

Re: HG612 is worse?


[re: mlmclaren] [link to this post]
 
The SR101.
Standard User mlmclaren
(experienced) Mon 13-Apr-15 15:04:07
Print Post

Re: HG612 is worse?


[re: spireites2008] [link to this post]
 
Have you thought about ringing Sky and requesting a newer hub (SR102) I read on Kitz the other day that this is G.INP compatible and also then you only have one piece of kit rather than two!

Plusnet Unlimited 21CN 4200/800 @ 4.2Km > TP-Link TD-W8968v3 - BQM IPv4
Plusnet Fibre Extra 66000/20000 @ 450m > HG612 (Unlocked) > Linksys LRT224 - BQM IPv4
Standard User Al1264
(member) Mon 13-Apr-15 15:09:06
Print Post

Re: HG612 is worse?


[re: spireites2008] [link to this post]
 
32400 downstream suggests you've been 'banded' by DLM, see this guide
Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | 7 | (show all)   Print Thread

Jump to