General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | (show all)   Print Thread
Standard User ciday
(newbie) Sat 10-Oct-15 04:54:15
Print Post

Need opinion on line stats after G.INP enabled


[link to this post]
 
A few days ago G.INP was enabled on my cabinet. Just wanted to see what you guys think.

xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 14216 Kbps, Downstream rate = 63592 Kbps
Bearer: 0, Upstream rate = 14216 Kbps, Downstream rate = 63973 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.3 6.3
Attn(dB): 20.9 0.0
Pwr(dBm): 12.6 7.6
VDSL2 framing
Bearer 0
MSGc: -6 26
B: 243 237
M: 1 1
T: 0 62
R: 10 16
S: 0.1215 0.5325
L: 16731 3816
D: 8 1
I: 254 127
N: 254 254
Q: 8 0
V: 0 0
RxQueue: 51 0
TxQueue: 17 0
G.INP Framing: 18 0
G.INP lookback: 17 0
RRC bits: 0 24
Bearer 1
MSGc: 154 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 6.4000 0.0000
L: 40 0
D: 3 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 6918
OHFErr: 0 0
RS: 1869992 428690
RSCorr: 0 0
RSUnCorr: 0 0
Bearer 1
OHF: 3610 0
OHFErr: 0 0
RS: 35486 0
RSCorr: 0 0
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 7507 0
rtx_c: 0 0
rtx_uc: 0 0

G.INP Counters
LEFTRS: 0 0
minEFTR: 63970 0
errFreeBits: 56593 0

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 7102797 0
Data Cells: 118 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 0 0
SES: 0 0
UAS: 26 26
AS: 59

Bearer 0
INP: 48.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 8.28
OR: 0.01 30.89
AgR: 64039.04 14246.83

Bearer 1
INP: 4.50 0.00
INPRein: 4.50 0.00
delay: 3 0
PER: 16.06 0.01
OR: 79.68 0.01
AgR: 79.68 0.01

Bitswap: 0/0 1/1

Total time = 1 min 25 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 26 26
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 1 min 25 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 26 26
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 1 min 25 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 26 26
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 57 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#
Standard User b4dger
(knowledge is power) Sat 10-Oct-15 11:03:00
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: ciday] [link to this post]
 
Have you got a copy of your stats before G.INP for comparison?

Standard User ciday
(newbie) Sat 10-Oct-15 12:42:07
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: b4dger] [link to this post]
 
I do. This was from around a couple of days before G.INP was activated as far as I can tell.

xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 14447 Kbps, Downstream rate = 59424 Kbps
Bearer: 0, Upstream rate = 14223 Kbps, Downstream rate = 60532 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 5.8 6.5
Attn(dB): 20.8 0.0
Pwr(dBm): 12.3 7.6
VDSL2 framing
Bearer 0
MSGc: 18 26
B: 239 237
M: 1 1
T: 64 62
R: 0 16
S: 0.1262 0.5322
L: 15216 3818
D: 1 1
I: 240 127
N: 240 254
Counters
Bearer 0
OHF: 471294384 1905987
OHFErr: 39705 810
RS: 0 1746101
RSCorr: 0 11352
RSUnCorr: 0 0

Bearer 0
HEC: 105158 0
OCD: 3564 0
LCD: 3564 0
Total Cells: 3763593395 0
Data Cells: 1928605206 0
Drop Cells: 0
Bit Errors: 0 0

ES: 13255 739
SES: 24 0
UAS: 26 26
AS: 955241

Bearer 0
INP: 0.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 2.02 8.28
OR: 94.72 30.91
AgR: 60627.17 14254.30

Bitswap: 703335/703335 2854/2854

Total time = 1 days 1 hours 21 min 7 sec
FEC: 0 11352
CRC: 39705 810
ES: 13255 739
SES: 24 0
UAS: 26 26
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 6 min 7 sec
FEC: 0 1
CRC: 4 0
ES: 3 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 0 2
CRC: 4 1
ES: 4 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 1 hours 21 min 7 sec
FEC: 0 6
CRC: 38 1
ES: 29 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 0 523
CRC: 1723 62
ES: 1008 60
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 11 days 1 hours 20 min 41 sec
FEC: 0 11352
CRC: 39705 810
ES: 13255 739
SES: 24 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#


Register (or login) on our website and you will not see this ad.

Standard User b4dger
(knowledge is power) Sat 10-Oct-15 17:45:52
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: ciday] [link to this post]
 
Looks pretty good to me then!
What router/modem are you using?

I'm on a BTOR supplied ECI modem (so no line stats) and my line has only slowed over the last year...

Standard User ciday
(newbie) Sat 10-Oct-15 18:03:26
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: b4dger] [link to this post]
 
Have an OR supplied ECI modem as well but given it was easier to unlock the Huawei HG612. I bought a revision 3B model off a certain auction site and followed some easily found instructions to flash some G.INP compatible firmware that allows me to monitor the stats as well. Router is a DLink 868L.
Standard User b4dger
(knowledge is power) Sat 10-Oct-15 18:21:17
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: ciday] [link to this post]
 
Thanks. I'm starting to think my ECI modem isn't helping me!
When funds allow (I've been saying that for a while now!) I'm going to buy a Billion 8800nl to see how that behaves.

Standard User BatBoy
(sensei) Sat 10-Oct-15 19:45:27
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: b4dger] [link to this post]
 
That's so true if you're on a Huawei cabinet, the ECI modem doesn't support G.Inp
Standard User ciday
(newbie) Sat 10-Oct-15 22:16:24
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: BatBoy] [link to this post]
 
On that note does anyone know of an easy way to unlock an ECI modem that isn't reliant on drilling and soldering? I have the "/r" variant of said modem.
Standard User BatBoy
(sensei) Sat 10-Oct-15 22:57:15
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: ciday] [link to this post]
 
You can perhaps avoid the soldering with a judiciously placed clothes-peg, but drilling is generally required. Not worth the effort really.
Standard User ciday
(newbie) Sat 10-Oct-15 23:00:20
Print Post

Re: Need opinion on line stats after G.INP enabled


[re: BatBoy] [link to this post]
 
I don't think the clothes peg method works on the /r variant due to a more awkward placement of the UART terminals. But would be interested in unlocking an ECI if an easier method is discovered.
Pages in this thread: 1 | 2 | 3 | (show all)   Print Thread

Jump to