General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User zarkrax
(member) Mon 21-Dec-15 19:40:09
Print Post

Reduce Speed after power cut


[link to this post]
 
Had fibre installed a few weeks ago and was pleased with the performance I was getting 73down 18up.

As per my luck we had a power cut (fire at a substation) I think today was the last day of the ten day training period.

Router came on and synced at
DSL Link Up: Down Rate=79987Kbps, Up Rate=19999Kbps; SNR Margin Down=19.6dB, Up=23.7dB

Didn't think anymore about it until I did a speed test tonight and for some reason only get 45-50mb down, according to BT my profile is set to 77, I have tried disconnecting from the internet and re-connecting, and I rebooted my HH5 once nothing seems to have made a difference.

Anything more I can do? What else could be the cause?
Standard User BatBoy
(sensei) Mon 21-Dec-15 19:42:57
Print Post

Re: Reduce Speed after power cut


[re: zarkrax] [link to this post]
 
BT may be managing throughput because of congestion in your local area.
Standard User zarkrax
(member) Mon 21-Dec-15 19:51:37
Print Post

Re: Reduce Speed after power cut


[re: BatBoy] [link to this post]
 
Ah ok thanks, that's intresting! It would explain a similar conversation I had with someone who was convinced BT throttled connections. I thought that was incorrect as it was suggested it was related to downloading too much. But now it seems he may have been correct and a victim of the congestion as well.


Register (or login) on our website and you will not see this ad.

Standard User ian007jen
(committed) Mon 21-Dec-15 20:10:07
Print Post

Re: Reduce Speed after power cut


[re: zarkrax] [link to this post]
 
Was the speed test carried out over wireless (or ethernet cable)?
Standard User zarkrax
(member) Mon 21-Dec-15 20:25:42
Print Post

Re: Reduce Speed after power cut


[re: ian007jen] [link to this post]
 
It was on 5ghz N Wireless (That's what i have always tested on) It doesn't seem to matter it was day or night I always got 75 on the speed test. The wireless device fluctuates between 84mb and 108mb so it should have enough bandwith to do an accurate speed test, shouldn't it?
Standard User BatBoy
(sensei) Mon 21-Dec-15 20:34:36
Print Post

Re: Reduce Speed after power cut


[re: zarkrax] [link to this post]
 
Well yeah, but it's always best to do speedtests wired to rule out wireless interference.
Standard User alexatkin
(regular) Mon 21-Dec-15 20:39:20
Print Post

Re: Reduce Speed after power cut


[re: BatBoy] [link to this post]
 
The link speed on wireless is only a very rough guide. I have had 130Mbit link speed and unable to get above 10Mbit before, due to crosstalk from other networks. Although this is a lot less likely on 5Ghz.

If in doubt then wired is the way to go. Its absolutely essential to confirm if its an actual broadband problem or not.
Standard User zarkrax
(member) Mon 21-Dec-15 21:18:44
Print Post

Re: Reduce Speed after power cut


[re: alexatkin] [link to this post]
 
OK it's official I am an idiot!!

Just did the wired test and got 79 down. Went back to wireless to double check and got 49 Down.

Massive apologies for wasting everyone's time. I guess the wireless is not as fast as it usually is for some reason this evening.

Also managed to annoy everyone in the house telling them to get off the internet so I could do speed tests!
Standard User ian007jen
(committed) Mon 21-Dec-15 21:25:35
Print Post

Re: Reduce Speed after power cut


[re: zarkrax] [link to this post]
 
Your not an idiot....they would have thrown the LAN cable in the bin. smile
Standard User RobertoS
(elder) Mon 21-Dec-15 22:11:54
Print Post

Re: Reduce Speed after power cut


[re: zarkrax] [link to this post]
 
Don't worry about it. Most of us are, until told about what we don't know. That's why you came here - to ask the question. We came earlier, so found out earlier.

The exceptions are rare. Think Faraday and Einstein et al.

IIRC in the UK there are 13 wifi channels, and whichever your router, (strictly speaking its WAP component), chooses you are likely to overlap with a nearby one. There was an excellent free checker called inSSIDer 3 that showed all around you. inSSIDer 4 that replaced it is chargeable.

Bear in mind that whatever channel your router is using it spreads over 2 each side, peaking on the one chosen. So 6 covers 4-8, 3 covers 1-5.

The wireless pages of your router should tell you what it has selected and let you change it to experiment. But without knowing what is around you are shooting in the dark.

It looks as if you can still get inSSIDer 3.

The indispensable man or woman passes from the scene, and what happens next is more or less the same thing as was happening before.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. Sync 59997/15142kbps @ 600m. - BQM

Edited by RobertoS (Mon 21-Dec-15 22:14:03)

Standard User ian007jen
(committed) Mon 21-Dec-15 22:37:12
Print Post

Re: Reduce Speed after power cut


[re: RobertoS] [link to this post]
 
Cough cough....5GHz as well smile
Standard User RobertoS
(elder) Mon 21-Dec-15 22:40:36
Print Post

Re: Reduce Speed after power cut


[re: ian007jen] [link to this post]
 
True, but when I was using it there was never any 5GHz detected.

The indispensable man or woman passes from the scene, and what happens next is more or less the same thing as was happening before.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. Sync 59997/15142kbps @ 600m. - BQM
Standard User JHo1
(regular) Tue 22-Dec-15 11:01:00
Print Post

Re: Reduce Speed after power cut


[re: RobertoS] [link to this post]
 
I used to use InSSIDer on my laptop but now I use Wifi Analyser on my phone. It's free and it's very good.

No doubt "other wfi analyser apps are available" as the BBC might say.

John
Standard User ukhardy07
(knowledge is power) Tue 22-Dec-15 12:32:42
Print Post

Re: Reduce Speed after power cut


[re: zarkrax] [link to this post]
 
I just want to confirm that BT do not intentionally slow you down for over downloading or reduce throughput due to congestion deliberately.

What may happen is if lots of users are downloading in your area, the throughput may drop slightly. So don't worry smile

Edited by ukhardy07 (Tue 22-Dec-15 12:36:41)

Standard User kasg
(knowledge is power) Tue 22-Dec-15 13:56:31
Print Post

Re: Reduce Speed after power cut


[re: zarkrax] [link to this post]
 
In reply to a post by zarkrax:
I think today was the last day of the ten day training period.

Surprised nobody else has commented - no such thing. Not for FFTC. Not even a little bit smile

Kevin

plusnet Unlimited Fibre - sync approx 64500/20000 at 450m - BQM
Using OpenDNS
Domains and web hosting with TSOHOST
Standard User RobertoS
(elder) Tue 22-Dec-15 14:12:12
Print Post

Re: Reduce Speed after power cut


[re: kasg] [link to this post]
 
I got bored, as many will probably believe their ISP and the BT Wholesale estimator than me.

It did occur to me a bit ago that the BTW DLM bodge to generate an IP Profile for FTTx might have left in place the recording of the lowest sync in the first 10 days, giving an MSR and FTR. Bonkers!

Cock-up and BT Wholesale themselves misunderstanding their own system becomes compounded. No doubt they will still be saying it when the whole country finally becomes FTTP or equivalent.

The indispensable man or woman passes from the scene, and what happens next is more or less the same thing as was happening before.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. Sync 59997/15142kbps @ 600m. - BQM

Edited by RobertoS (Tue 22-Dec-15 14:12:53)

Standard User BatBoy
(sensei) Tue 22-Dec-15 14:15:18
Print Post

Re: Reduce Speed after power cut


[re: RobertoS] [link to this post]
 
They probably say it now for FTTP connections.
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to