General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | (show all)   Print Thread
Standard User adslmax
(knowledge is power) Tue 09-Feb-16 18:25:28
Print Post

Notice for Ribble


[link to this post]
 
Hi Ribble

Can you please check my parents - TF7 5PJ on Exchange CUCKOO OAK is served by Cabinet 9 as I think this cabinet is full as I notice my parents line sync rate has dropped to 42Meg from 80Meg.

Thanks.
Standard User leexgx
(committed) Tue 09-Feb-16 19:59:13
Print Post

Re: Notice for Ribble


[re: adslmax] [link to this post]
 
i would not expect a full cab to reduce link speed from 80 down to 43 (you must be extremely close to it to get 80mb before)

maybe a fault maybe (do you hear any noise on the phone line when in call or when silent)

Edited by leexgx (Tue 09-Feb-16 20:00:39)

Standard User adslmax
(knowledge is power) Tue 09-Feb-16 20:12:56
Print Post

Re: Notice for Ribble


[re: leexgx] [link to this post]
 
It's not my line. It's my parents line. There is no noise or cracking noise on their line. Possible crosstalk on their cabinet.

Edited by adslmax (Tue 09-Feb-16 20:15:21)


Register (or login) on our website and you will not see this ad.

Standard User Ignitionnet
(knowledge is power) Tue 09-Feb-16 21:43:42
Print Post

Re: Notice for Ribble


[re: adslmax] [link to this post]
 
In reply to a post by adslmax:
Hi Ribble

Can you please check my parents - TF7 5PJ on Exchange CUCKOO OAK is served by Cabinet 9 as I think this cabinet is full as I notice my parents line sync rate has dropped to 42Meg from 80Meg.

Thanks.


The cabinet is not full. That speed drop is too severe to be crosstalk.

Standard User Ribble
(fountain of knowledge) Thu 11-Feb-16 08:46:51
Print Post

Re: Notice for Ribble


[re: Ignitionnet] [link to this post]
 
The cabinet is not full

Not even close
Standard User Ignitionnet
(knowledge is power) Thu 11-Feb-16 09:40:01
Print Post

Re: Notice for Ribble


[re: Ribble] [link to this post]
 
In reply to a post by Ribble:
The cabinet is not full

Not even close


Large Huawei passing 418 premises in a Virgin Media area. Would be pretty impressive if 288 ports were full smile

Standard User adslmax
(knowledge is power) Thu 11-Feb-16 18:16:45
Print Post

Re: Notice for Ribble


[re: Ignitionnet] [link to this post]
 
Then I don't know why is my parents FTTC drop from 79999 to 45878 as the upstream also drop from 19999 to 18766 as their SNR on both down and up are 6.0 dB but G.INP was enabled at 8:1

The phone line was fine as Plusnet supplier say my parents cannot get more 45 Meg according to BT. But BT Wholesale Checker say below:

BT BROADBAND AVAILABILITY CHECKER
Telephone Number 01952****** on Exchange CUCKOO OAK is served by Cabinet 9

Featured Products


Downstream Line Rate(Mbps)


Upstream Line Rate(Mbps)


Downstream Range(Mbps)


Availability Date
High Low High Low
FTTC Range A (Clean) 80 74 20 20 -- Available
FTTC Range B (Impacted) 80 70.4 20 19 -- Available
WBC ADSL 2+ Up to 5 -- 3 to 7.5 Available
WBC ADSL 2+ Annex M Up to 5 Up to 1 3 to 7.5 Available
ADSL Max Up to 4 -- 2.5 to 7 Available
WBC Fixed Rate 2 -- -- Available
Fixed Rate 2 -- -- Available
Other Offerings
FTTP on Demand 330 30 -- Available
Fibre Multicast -- -- -- Available
Copper Multicast -- -- -- Available

BT Speedtester result on my parent line:

1. Best Effort Test: -provides background information.

Download Speed
43.16 Mbps

0 Mbps 44.35 Mbps
Max Achievable Speed

Download speedachieved during the test was - 43.16 Mbps
For your connection, the acceptable range of speedsis 40 Mbps-44.35 Mbps .
Additional Information:
IP Profile for your line is - 44.35 Mbps

2. Upstream Test: -provides background information.

Upload Speed
17.39 Mbps

0 Mbps 20 Mbps
Max Achievable Speed

Upload speed achieved during the test was - 17.39Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps

Edited by adslmax (Thu 11-Feb-16 18:18:55)

Standard User Zarjaz
(eat-sleep-adslguide) Thu 11-Feb-16 18:40:47
Print Post

Re: Notice for Ribble


[re: adslmax] [link to this post]
 
Done anything like restart the modem/router ?

Standard User adslmax
(knowledge is power) Thu 11-Feb-16 18:42:27
Print Post

Re: Notice for Ribble


[re: Zarjaz] [link to this post]
 
I did power down for 30 minutes and turn back on. Still the same!
Standard User lee111s
(member) Thu 11-Feb-16 21:47:48
Print Post

Re: Notice for Ribble


[re: adslmax] [link to this post]
 
Connected to the test socket?

If so, an engineer visit is required.
Pages in this thread: 1 | 2 | 3 | 4 | 5 | (show all)   Print Thread

Jump to