General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User jimgb17
(regular) Fri 18-Nov-16 12:16:05
Print Post

Loads of CRC/SES after Openreach Visit


[link to this post]
 
Hi all just had a OR broadband engineer visit today after ee said i still had a fault on my line after having my dropline replaced by a line engineer who didn't reset my Profile after sorting the line...
so ee requested a second visit even if i think myself i didn't really need one.

anyways the 2nd engineer fitted a new master socket and said he could see loads of errors on my line that he was going to look into he said he would check the cards at the cab. i was getting errors before this visit . i wasn't getting as much errors as before now my line stats have got worse.
DLM will be kicking in soon seeing loads of CRC/SES on the line.....
my stats are on-line.

What do you guys think...will the errors settle down ? i have checked the line via line rest and there is no noise.
i Had a v3 master socket before not have the new v5c fitted by the engineer....
my sync speed has gone back to normal for now but with all the errors CRC/SES dlm will be kicking in soon.
I didn't ask for this second visit it was ee aster the a fallow up call who recommended it.

what do you think should i report to EE again or should i leave it for now?

Jimgb17
Standard User jimgb17
(regular) Fri 18-Nov-16 12:16:44
Print Post

Re: Loads of CRC/SES after Openreach Visit


[re: jimgb17] [link to this post]
 
xDSL
Mode VDSL2
Traffic Type PTM
Status Up
Link Power State L0
Downstream Upstream
Line Coding (Trellis) On On
SNR Margin (dB) 6.4 6.3
Attenuation (dB) 17.3 0.0
Output Power (dBm) 6.4 6.5
Attainable Rate (Kbps) 78653 21761
Rate (Kbps) 77918 20000
B (# of bytes in Mux Data Frame) 239 236
M (# of Mux Data Frames in an RS codeword) 1 1
T (# of Mux Data Frames in an OH sub-frame) 23 5
R (# of redundancy bytes in the RS codeword) 0 16
S (# of data symbols over which the RS code word spans) 0.0980 0.3771
L (# of bits transmitted in each data symbol) 19584 5410
D (interleaver depth) 1 1
I (interleaver block size in bytes) 240 255
N (RS codeword size) 240 255
Delay (msec) 0 0
INP (DMT symbol) 0.00 0.00
OH Frames 0 0
OH Frame Errors 41758 0
RS Words 0 2799442
RS Correctable Errors 0 0
RS Uncorrectable Errors 0 0
HEC Errors 8019 0
OCD Errors 4 0
LCD Errors 4 0
Total Cells 646412304 0
Data Cells 495086 0
Bit Errors 0 0
Total ES 201 0
Total SES 95 0
Total UAS 0 0

Connection Time 01:14:59

Jimgb17

Edited by jimgb17 (Fri 18-Nov-16 12:18:25)

  Print Thread

Jump to