General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | (show all)   Print Thread
Standard User lockyatlrg
(fountain of knowledge) Tue 16-May-17 16:58:51
Print Post

G.INP


[link to this post]
 
I recently moved house and back on a VDSL line.

I'm connected at 79mbs (just under full sync) with a margin of 6.2db

Been connected since the 10th and just wondering when G.INP will show it's self as I my previous time on VDSL with it showed great benefits

My current provider is sky if anyone is interested.

Edited by lockyatlrg (Tue 16-May-17 18:47:46)

Standard User BatBoy
(sensei) Tue 16-May-17 17:12:08
Print Post

Re: G.INP


[re: lockyatlrg] [link to this post]
 
It certainly will if you're on a Huawei cabinet with a Broadcom based modem. Other combinations, I'm not sure.
Standard User lockyatlrg
(fountain of knowledge) Tue 16-May-17 18:28:50
Print Post

Re: G.INP


[re: BatBoy] [link to this post]
 
Yes the Cab is 100% BC based and not sure what chipset the SkyQ hub uses.


Register (or login) on our website and you will not see this ad.

Standard User Banger
(eat-sleep-adslguide) Tue 16-May-17 18:30:50
Print Post

Re: G.INP


[re: lockyatlrg] [link to this post]
 
Possibly 2 days to a month or you may not even see it if you have low Errored Seconds. The Algorithm usually applies Interleaving for a while then G.INP on a new line.

Tim
www.uno.net.uk & freenetname
Asus DSL-N55U and TP-Link WD9970 on 80 Meg LLU Fibre
http://www.thinkbroadband.com/speedtest/results.html...

Current Sync: 68696/18766
Standard User lockyatlrg
(fountain of knowledge) Tue 16-May-17 18:39:54
Print Post

Re: G.INP


[re: Banger] [link to this post]
 
Been in sync since the 10th bar a power cut and some new firmware applied to the router from sky.

anyone know what chipset the skyq hub uses?

Once G.INP is applied I would sync at full 79999? as I remember last time it put about 8mb on my attainable rate on my old line.
Standard User WilliamGrimsley
(experienced) Tue 16-May-17 18:46:39
Print Post

Re: G.INP


[re: lockyatlrg] [link to this post]
 
If the Hub has a BDCM chipset, and if DLM decides to enable downstream G.INP, then yes you would.

Router in use: Billion BiPAC 8800AXL.

Edited by WilliamGrimsley (Tue 16-May-17 18:47:59)

Standard User lockyatlrg
(fountain of knowledge) Tue 16-May-17 18:55:22
Print Post

Re: G.INP


[re: WilliamGrimsley] [link to this post]
 
This is the DSL firmware version

A2pv6F039m1.d24m

if anyone can tell if its a BC from that
Standard User WilliamGrimsley
(experienced) Tue 16-May-17 19:06:57
Print Post

Re: G.INP


[re: lockyatlrg] [link to this post]
 
Is it the Sky Q Hub? I'm pretty sure that uses a BDCM chipset.

Router in use: Billion BiPAC 8800AXL.

Edited by WilliamGrimsley (Tue 16-May-17 19:09:09)

Standard User lockyatlrg
(fountain of knowledge) Tue 16-May-17 19:46:38
Print Post

Re: G.INP


[re: WilliamGrimsley] [link to this post]
 
Yes its the sky Q hub it does state it supports G.inp
Standard User WilliamGrimsley
(experienced) Tue 16-May-17 19:55:53
Print Post

Re: G.INP


[re: lockyatlrg] [link to this post]
 
Good! Hope it comes soon! Try not to keep waiting as it'll make the wait longer! wink

Router in use: Billion BiPAC 8800AXL.
Pages in this thread: 1 | 2 | 3 | (show all)   Print Thread

Jump to