General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | 4 | (show all)   Print Thread
Standard User djay
(committed) Fri 08-Sep-17 17:12:55
Print Post

Re: Major speed increase 55mb to 79mbit


[re: lee111s] [link to this post]
 
It’s possible but that wouldn’t account for the latency increase from 13-15ms to bbc.co.uk and now min 21ms.

My first hope after my router is 21ms and used to be around 13, this only changed when the connection got to max speed.
Standard User WilliamGrimsley
(experienced) Fri 08-Sep-17 17:18:13
Print Post

Re: Major speed increase 55mb to 79mbit


[re: djay] [link to this post]
 
To me it looks more like vectoring. Please can you post the result of the adsl info --vectoring command from the CLI?

William Grimsley.
Standard User adslmax
(knowledge is power) Fri 08-Sep-17 17:25:00
Print Post

Re: Major speed increase 55mb to 79mbit


[re: MrSaffron] [link to this post]
 
In reply to a post by MrSaffron:
900m means zero benefit from a G.fast pod


MrSaffron what about 250m?


Register (or login) on our website and you will not see this ad.

Administrator MrSaffron
(staff) Fri 08-Sep-17 17:27:59
Print Post

Re: Major speed increase 55mb to 79mbit


[re: adslmax] [link to this post]
 
See table on https://www.thinkbroadband.com/how-broadband-works

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User wolvesmad
(fountain of knowledge) Fri 08-Sep-17 18:01:21
Print Post

Re: Major speed increase 55mb to 79mbit


[re: WilliamGrimsley] [link to this post]
 
Didn't realise vectoring was rolled out now by BT OR?

It would certainly make sense though. My line is capable of full sync if there is a local power outage, my HG612 must beat the other routers to sync so very little crosstalk.

Standard interleaved I sync at 55/20.

G.INP activated 61/20.

Not had OR bring the SNR down on this line yet.

-

TalkTalk FTTC

Edited by wolvesmad (Fri 08-Sep-17 18:25:57)

Standard User WilliamGrimsley
(experienced) Fri 08-Sep-17 18:31:33
Print Post

Re: Major speed increase 55mb to 79mbit


[re: wolvesmad] [link to this post]
 
Yes, for some cabinets which have a lot of customers far from them in order to help meet the USO.

William Grimsley.

Edited by WilliamGrimsley (Fri 08-Sep-17 18:31:58)

Standard User j0hn83
(committed) Fri 08-Sep-17 19:21:43
Print Post

Re: Major speed increase 55mb to 79mbit


[re: WilliamGrimsley] [link to this post]
 
There is currently no USO in place in the UK.
Vectoring is sometimes deployed on BDUK funded cabinets to help meet properties passed targets with "superfast" speeds.

I believe that's what you meant to say smile
Standard User WilliamGrimsley
(experienced) Fri 08-Sep-17 20:00:43
Print Post

Re: Major speed increase 55mb to 79mbit


[re: j0hn83] [link to this post]
 
Yep, that's it! I was trying to decide if it was that or the "hopefully planned" USO. Thanks for confirming. smile

William Grimsley.

Edited by WilliamGrimsley (Fri 08-Sep-17 20:00:57)

Standard User djay
(committed) Fri 08-Sep-17 21:14:09
Print Post

Re: Major speed increase 55mb to 79mbit


[re: WilliamGrimsley] [link to this post]
 
xdslcmd info --vectoring
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 24214 Kbps, Downstream rate = 80472 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79997 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Vectoring state: 5
VCE MAC Address: 0:0:0:0:0:0
Total error samples Ethernet pkts sent: 0
Total error samples Ethernet pkts discarded: 0
Total error samples statuses sent: 0
Total error samples statuses discarded: 0
#
Standard User djay
(committed) Fri 08-Sep-17 21:15:30
Print Post

Re: Major speed increase 55mb to 79mbit


[re: djay] [link to this post]
 
Vectoring status: 5 (VECT_UNCONFIGURED)
Pages in this thread: 1 | [2] | 3 | 4 | (show all)   Print Thread

Jump to