General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User dsgoody
(newbie) Tue 10-Oct-17 10:42:57
Print Post

Re: Slower sync; possible noise?


[re: BatBoy] [link to this post]
 
Openreach; and it's solid.

Are we talking about the cable between the router and master? If so it's about 3 to 5m of ISP supplied goodness. Far too long and is being replaced with a 1m cable on order.
Standard User BatBoy
(sensei) Tue 10-Oct-17 11:02:08
Print Post

Re: Slower sync; possible noise?


[re: dsgoody] [link to this post]
 
it's ok. I'm just re-reading the info you've already posted and I think you've answered all my questions already.
Standard User MHC
(sensei) Tue 10-Oct-17 11:44:47
Print Post

Re: Slower sync; possible noise?


[re: dsgoody] [link to this post]
 
Is that rust in the back box? If so, I would be more concerned about damp in the wall than the connection.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit


Register (or login) on our website and you will not see this ad.

Standard User Zarjaz
(eat-sleep-adslguide) Tue 10-Oct-17 11:45:04
Print Post

Re: Slower sync; possible noise?


[re: dsgoody] [link to this post]
 
Donít be touching them crimps, thereís not enough wire inside to play with.

Standard User BatBoy
(sensei) Tue 10-Oct-17 11:51:44
Print Post

Re: Slower sync; possible noise?


[re: dsgoody] [link to this post]
 
To be honest, I think the wiring is fine and you're just being affected by aluminium cables as already stated.

The best way forward in my opinion it to use a modem that supports DSLstats and get some graphs on MyDslWebStats for analysis.
Standard User Zarjaz
(eat-sleep-adslguide) Tue 10-Oct-17 11:51:58
Print Post

Re: Slower sync; possible noise?


[re: MHC] [link to this post]
 
Reasonably common, damp tracking back up the exterior of the direct in ground cable. Not a good way to install cables, and thatís why they stopped it.

Standard User dsgoody
(newbie) Thu 12-Oct-17 23:14:23
Print Post

Re: Slower sync; possible noise?


[re: Zarjaz] [link to this post]
 
Update; my 1m RJ45 to RJ11 lead has arrived. It's made with BT CW1724 cable and has improved attenuation and max sync speed slightly.

Maximum data rate:
24817 / 62028
Noise margin:
8.9 / 6.2
Line attenuation:
15.2

If I ever get a separate modem in the future I will be sure to get the stats checked out for Ali.
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to