General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User youngsyp
(member) Mon 27-Nov-17 15:21:49
Print Post

How long until G.INP is enabled on a new cabinet?


[link to this post]
 
Hi,

As I've finally got up and running on an FTTC service, I thought I'd enquire as to how long, in general, it takes for a cabinet to be G.INP enabled?

The cabinet was activated on 26th October.

Paul

ISP: IDNet
Service: FTTC Unlimited (55/10)
Exchange: EMSILVE
Cabinet: 4
DSLAM: Huawei
Modem/ router: Billion BiPAC 8800AXL
Attenuation: 21.8
Target SNRM:
Current sync: 54998/ 9999
Standard User RobertoS
(elder) Mon 27-Nov-17 16:04:50
Print Post

Re: How long until G.INP is enabled on a new cabinet?


[re: youngsyp] [link to this post]
 
I doubt if it will on your connection unless you have heavy interleaving. You are on maximum sync.

My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. 200GB. Sync 74145/13476Kbps @ 600m. BQMs - IPv4 & IPv6
Standard User youngsyp
(member) Mon 27-Nov-17 16:17:50
Print Post

Re: How long until G.INP is enabled on a new cabinet?


[re: RobertoS] [link to this post]
 
I've just changed my signature as the old one wasn't quite up to date.

As you can see, sync has reduced on the down link but interleaving has also reduced since DLM kicked it and is now at 1007 on the down link and 1 on the up link, with a 8ms and 0ms delay respectively.

Paul

ISP: IDNet
Service: FTTC Unlimited (55/10)
Exchange: EMSILVE
Cabinet: 4
DSLAM: Huawei
Modem/ router: Billion BiPAC 8800AXL
Attenuation: 21.7
Target SNRM:
Current sync: 51446/ 9999


Register (or login) on our website and you will not see this ad.

Standard User youngsyp
(member) Thu 30-Nov-17 11:42:14
Print Post

Re: How long until G.INP is enabled on a new cabinet?


[re: youngsyp] [link to this post]
 
OR have just answered my question!

Uptime: 3 min 27 sec
Resyncs: 0 (since 30 Nov 2017 11:35:51)

Downstream Upstream
Line attenuation (dB): 21.7 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 55000 9999
SNR margin (dB): 7.2 6.7
Power (dBm): 12.5 4.7
Interleave depth: 16 1
INP: 48.00 0
G.INP: Enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)

RSCorr/RS (%): 0.0026 0.0000
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 0 0

Interleave depth is now at 16 down and 1 up with 0ms delay. So after dropping to 50Mb/s yesterday after a re-sync, I'm a happy bunny again.

Paul

ISP: IDNet
Service: FTTC Unlimited (55/10)
Exchange: EMSILVE
Cabinet: 4
DSLAM: Huawei
Modem/ router: Billion BiPAC 8800AXL
Attenuation: 21.7
Target SNRM:
Current sync: 55000/ 9999
G.INP: Enabled
  Print Thread

Jump to