General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User snowy44
(learned) Thu 12-Jul-18 17:18:36
Print Post

High error count


[link to this post]
 
Hi,

Please can someone take a look at the below line stats and advise a possible reason for the extremely high error seconds and CRC error count ?


Many thanks.


IPv4
/
DSL
Line State: up
Modulation: ITU G.993.2(VDSL2)
Annex Mode: ANNEX_B
DSL (Sync) Uptime: 2d:2h:33m:43s
UpLink / DownLink
SNR Margin: 6.5 dB / 5.6 dB
Line Attenuation: 0.1 dB / 10.2 dB
Output Power: 4.5 dbm / 3.6 dbm
Data Rate: 20000 kbps / 74203 kbps
ES: 18 / 8099
SES: 0 / 2009
UAS: 6841 / 6841
FEC: 3824 / 394876
CRC: 37 / 114288
Standard User j0hn83
(experienced) Thu 12-Jul-18 18:23:25
Print Post

Re: High error count


[re: snowy44] [link to this post]
 
Local thunderstorm? Pretty high SES too.

Had any local thunderstorms? DLM should ignore these as Wide Area Events.

Has DLM acted on your line since the high ES?
Standard User snowy44
(learned) Thu 12-Jul-18 18:30:59
Print Post

Re: High error count


[re: j0hn83] [link to this post]
 
Hi,

No thunderstorms and I don't believe the DLM has made any changes on the line.


Register (or login) on our website and you will not see this ad.

Standard User Zarjaz
(eat-sleep-adslguide) Thu 12-Jul-18 21:11:47
Print Post

Re: High error count


[re: snowy44] [link to this post]
 
Is the modem connected into the master socket, and no extension wiring attached ?

Standard User snowy44
(learned) Thu 12-Jul-18 21:51:03
Print Post

Re: High error count


[re: Zarjaz] [link to this post]
 
Hi,

It is yes and no extensions are attached to the main socket.
  Print Thread

Jump to