General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User wolvesmad
(knowledge is power) Tue 16-Oct-18 12:34:11
Print Post

G.FAST Small PCP


[link to this post]
 
Is G.Fast rolled out to smaller single door PCP's?

All the photos and cabs I have seen out and about have been twin door bigger PCP's.

-

BT Fibre Unlimited 55|10Mb
Standard User Zarjaz
(eat-sleep-adslguide) Tue 16-Oct-18 13:07:24
Print Post

Re: G.FAST Small PCP


[re: wolvesmad] [link to this post]
 
They will reshell the cab for a larger on if required.

Standard User 8skellerns
(experienced) Sun 21-Oct-18 18:28:51
Print Post

Re: G.FAST Small PCP


[re: wolvesmad] [link to this post]
 
Not viable to g.fast single door cabs.


Register (or login) on our website and you will not see this ad.

Standard User DavaDK
(newbie) Sun 21-Oct-18 21:49:04
Print Post

Re: G.FAST Small PCP


[re: 8skellerns] [link to this post]
 
Why not, just of interest
Standard User j0el
(newbie) Sun 21-Oct-18 21:49:10
Print Post

Re: G.FAST Small PCP


[re: 8skellerns] [link to this post]
 
In reply to a post by 8skellerns:
Not viable to g.fast single door cabs.

How many premises can a single door cabinet serve? I imagine it could be viable to have G.fast on a single door cabinet if it was high density with a good amount of subscribers able to receive ultrafast speeds (so therefore a good candidate for G.fast). G.fast only allows for up to 48 subscribers under the current amendment with current DPUs that I am aware of, but the target is for 96 in the future. There's probably a good chance that the amount of premises eligible will be more than capacity in higher density areas on smaller cabinets.

Though that ignores that the G.fast pod needs the newer steel cabinet design in order to bolt on a G.fast pod, as with copper extensions.

Edited by j0el (Sun 21-Oct-18 21:50:54)

Standard User Zarjaz
(eat-sleep-adslguide) Mon 22-Oct-18 06:07:52
Print Post

Re: G.FAST Small PCP


[re: DavaDK] [link to this post]
 
Well the kit won’t physically attach to that type of cab for starters.

  Print Thread

Jump to