General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User iwish
(committed) Wed 09-Feb-11 19:50:30
Print Post

Lift and shift No internet


[link to this post]
 
Yesterday i had a lift and shift done and was called by the engineer to see if all was ok now
turned on router and got a sync but masses of errors came right in
So called isp to say it was worse and we bothed found the line noise was bad and he could hardly hear me.
Bt blamed it on a port mismatch
so they did something again, then they called to ask if it was ok now.
Turned the router on and got a great sync and no errors and Snr was great
only thing now is i cant log on to the internet
Isp said it could be a stale session and to power off for 15mins
Did this and still no internet
It has been over 24 hours and router shows very very very low errors and all corrected
but still cant get an internet connection
Have been told another engineer has to come to the house again

Any one got any ideas what could be wrong
Standard User yarwell
(sensei) Wed 09-Feb-11 20:12:27
Print Post

Re: Lift and shift No internet


[re: iwish] [link to this post]
 
Any one got any ideas what could be wrong


configuration problem perhaps - can you log in with the bt_test@startup_domain log in ?

Phil

MaxDSL - goes as fast as it can and doesn't read the line checker first.

MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade.
Standard User iwish
(committed) Wed 09-Feb-11 20:18:45
Print Post

Re: Lift and shift No internet


[re: yarwell] [link to this post]
 
just tried and nope
will not log in with that
with my loging details i get this LCP is allowed to come up.
with the one you said i get this LCP is down
my router will not login even with a master login in that enta gave me
Can see my sync on adsl but no IP given to me
This all came to light as soon as they did the first lift and shift


Register (or login) on our website and you will not see this ad.

Standard User yarwell
(sensei) Wed 09-Feb-11 20:21:54
Print Post

Re: Lift and shift No internet


[re: iwish] [link to this post]
 
my router will not login even with a master login in that enta gave me


what was that ?

Phil

MaxDSL - goes as fast as it can and doesn't read the line checker first.

MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade.
Standard User iwish
(committed) Wed 09-Feb-11 20:24:11
Print Post

Re: Lift and shift No internet


[re: yarwell] [link to this post]
 
i forget but it was a login they gave me to try that should work

my router stats with my details and the bt one u gave me

ADSL Port
MAC Address 00:18:4D:5F:5F:C5
IP Address ---
Network Type PPPoA
IP Subnet Mask ---
Gateway IP Address ---
Domain Name Server ---


Modem
ADSL Firmware Version A2pB022c.d20e
Modem Status Connected
DownStream Connection Speed 3927 kbps
UpStream Connection Speed 888 kbps
VPI 0
VCI 38

Connection Time 00:00:00
Connecting to Server Disconnect
Negotiation LCP down.
Authentication ---
Getting IP Addresses ---
Getting Network Mask ---
Standard User yarwell
(sensei) Wed 09-Feb-11 20:35:24
Print Post

Re: Lift and shift No internet


[re: iwish] [link to this post]
 
bt_test_user@startup_domain perhaps ?

looking like a config problem at BT end

Phil

MaxDSL - goes as fast as it can and doesn't read the line checker first.

MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade.
Standard User iwish
(committed) Wed 09-Feb-11 20:46:24
Print Post

Re: Lift and shift No internet


[re: yarwell] [link to this post]
 
yup that's the one and blank password

bt_test_user@startup_domain

Edited by iwish (Wed 09-Feb-11 20:48:13)

Standard User BP1
(committed) Wed 09-Feb-11 21:43:16
Print Post

Re: Lift and shift No internet


[re: iwish] [link to this post]
 
In reply to a post by iwish:
yup that's the one and blank password

bt_test_user@startup_domain


Crikey they cant seem to get yours or mine connection sorted.
I was suppose to have FTTC this morning. Engineer came 7.30am and completed the install. Then he ran in to problems and i was told that the exchange has not configured for the new FTTC cab. So my ADSL2+ got put back.
Now i have to wait untill 23 Feb to get this soughted. And guess what as from this morning my ADSL2 is now starting to reboot with high upstream errors. I reckon they gave me your lift and shift cable.

What luck?

Regards

BP1

BTBroadband

"When everything's coming your way, you're in the wrong lane"
Standard User iwish
(committed) Thu 10-Feb-11 16:35:23
Print Post

Re: Lift and shift No internet


[re: BP1] [link to this post]
 
All fixed finally
Well all is well and can i just say for a 50db line this is what i sync at
downstream
Noise Margin: 5.9 dB
Connection Rate: 5362 Kbps
Line Attenuation: 52.0 dB
Power: 0.0 dBm

upstream
Noise Margin: 5.7 dB
Connection Rate: 840 Kbps
Line Attenuation: 31.9 dB
Power: 12.9 dBm
Max Rate: 844 Kbps
Standard User BP1
(committed) Thu 10-Feb-11 17:34:04
Print Post

Re: Lift and shift No internet


[re: iwish] [link to this post]
 
In reply to a post by iwish:
All fixed finally
Well all is well and can i just say for a 50db line this is what i sync at
downstream
Noise Margin: 5.9 dB
Connection Rate: 5362 Kbps
Line Attenuation: 52.0 dB
Power: 0.0 dBm

upstream
Noise Margin: 5.7 dB
Connection Rate: 840 Kbps
Line Attenuation: 31.9 dB
Power: 12.9 dBm
Max Rate: 844 Kbps


Thats great news that your connection is finally fixed.
Hopefully i will get the engineer that fixed yours

Regards

BP1

BTBroadband

"When everything's coming your way, you're in the wrong lane"
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to