General Discussion
  >> General Broadband Chatter

Register (or login) on our website and you will not see this ad.

  Print Thread
Standard User TrishaH
(experienced) Fri 20-Dec-13 16:54:49
Print Post

Changes after disconnection

[link to this post]
Just noticed on the BQM I had a brief interruption or connection this afternoon at 13.46.
After getting the new 7800n late November, and also the returned 7800DXL just a couple of weeks prior to that, I'd had NM's of up to 9.2 down until this afternoon. With 8456down/1144 up.

I now have a faster connection and NM's more like they used to be ...hoping it stays that way!

DSP Firmware Version A2pB025f.d22k
DMT Status No Defect
Operational Mode ADSL2+
Upstream 1153
Downstream 8996
SNR Margin(Upstream) 5.9
SNR Margin(Downstream) 5.3
Line Attenuation(Upstream) 26.6
Line Attenuation(Downstream) 45.5

Standard User RobertoS
(sensei) Fri 20-Dec-13 17:00:38
Print Post

Re: Changes after disconnection

[re: TrishaH] [link to this post]
Looks good smile.

It is highly likely to stay that way, as it has done so for at least 10 days for that to happen.

My broadband basic info/help site - | Domains,site and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 59.4/14.4Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
Standard User TrishaH
(experienced) Sat 21-Dec-13 00:31:35
Print Post

Re: Changes after disconnection

[re: RobertoS] [link to this post]
I hope it does stay that way.

On checking, I see that apart from early November, it's had the high NM down ever since a couple of disconnections after thunder in August. (perhaps what damaged my router).
The connection had been steady at 8456/1114 ever since the replacement 7800n arrived 23rd November, but still with the 8-9 NM down until today.
System up for 27days.

Register (or login) on our website and you will not see this ad.

  Print Thread

Jump to