General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User JB68
(regular) Thu 01-May-14 21:26:18
Print Post

DLM keeps attacking me


[link to this post]
 
Hi,

I am using a HG612 3B modem unlocked and a AC66u router.

My sync is usually 8000kps but has dropped alot. Any reason why?

Here is the stats:

xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 1196 Kbps, Downstream rate = 6848 Kbps
Bearer: 0, Upstream rate = 1188 Kbps, Downstream rate = 5827 Kbps

Link Power State: L0
Mode: ADSL2+ Annex A
TPS-TC: ATM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 11.6 6.2
Attn(dB): 40.0 20.8
Pwr(dBm): 0.0 12.5
ADSL2 framing
Bearer 0
MSGc: 59 10
B: 182 27
M: 1 8
T: 1 6
R: 14 6
S: 0.9994 5.9935
L: 1577 307
D: 32 4
Counters
Bearer 0
SF: 12538777 128301
SFErr: 659 332
RS: 815020381 2679238
RSCorr: 19912760 3846
RSUnCorr: 5906 0

Bearer 0
HEC: 3216 291
OCD: 5 0
LCD: 5 0
Total Cells: 2798745870 570249735
Data Cells: 531232920 32264093
Drop Cells: 0
Bit Errors: 265446 29017

ES: 322 254
SES: 10 0
UAS: 219 209
AS: 203633

Bearer 0
INP: 1.00 0.00
INPRein: 0.00 0.00
delay: 8 6
PER: 16.23 17.98
OR: 32.02 7.11
AgR: 5836.91 1191.31

Bitswap: 42613/42614 0/0
Standard User Zarjaz
(knowledge is power) Thu 01-May-14 21:29:37
Print Post

Re: DLM keeps attacking me


[re: JB68] [link to this post]
 
At 40db attenuation, that's struggling to give you a decent sync rate. Any idea how far from the cab you are ?

Standard User JB68
(regular) Thu 01-May-14 21:32:13
Print Post

Re: DLM keeps attacking me


[re: Zarjaz] [link to this post]
 
I'm still on ADSL2+, Exchange is quite far away.

Usually my SNR is at 6, but Error Seconds go crazy and usually set at 9 at about 7000-8000kbps with hardly any Error Seconds.

FTTC is now available, should get it a week tuesday.

Can all this work at exchange and cabinet cause this.


Register (or login) on our website and you will not see this ad.

  Print Thread

Jump to