General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | (show all)   Print Thread
Standard User Roksan
(newbie) Mon 20-Nov-17 12:29:42
Print Post

Huawei EchoLife HG612 - Is G.INP Enabled?


[link to this post]
 
Hello I'm using a Huawei EchoLife HG612 modem that's unlocked & seems to work perfectly with latest firmware that should support G.INP - I'm on a Huawei cab. Is here any way from the limited stats the modem gives whether G.INP is enabled or not?

I have used the HG612 for quite a while in its unlocked state which as I understand did not support G.INP. I do prefer separate modem Ė router - itís nice now to be able to see line stats now itís unlocked.

Edited by Roksan (Mon 20-Nov-17 12:30:25)

Standard User BatBoy
(sensei) Mon 20-Nov-17 12:36:08
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: Roksan] [link to this post]
 
The presence of Bearer 1 is a give-away.

What do you mean - limited stats?

Edited by BatBoy (Mon 20-Nov-17 12:37:12)

Standard User Roksan
(newbie) Mon 20-Nov-17 12:41:21
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
Where would I fine Bearer 1? plz? BTW it's only been unlocked a day or so. Stats are somewhat limited in comparison to an Aus 68 modem router for example?

Edited by Roksan (Mon 20-Nov-17 12:49:20)


Register (or login) on our website and you will not see this ad.

Standard User BatBoy
(sensei) Mon 20-Nov-17 12:55:04
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: Roksan] [link to this post]
 
Full stats are available through telnet.

I assume you're referring to the web interface which is known to be wrong but if you goto Status > WAN > xDSL, you should see Path 0 and Path 1 on Statistics at the bottom.

Edited by BatBoy (Mon 20-Nov-17 13:00:03)

Standard User Roksan
(newbie) Mon 20-Nov-17 13:04:27
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
Yes both those are there - Thanks - Going to get my head round Telnet later this week - Thanks !
Standard User BatBoy
(sensei) Mon 20-Nov-17 13:08:19
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: Roksan] [link to this post]
 
No problem wink

Then you can check out dslstats and mydslwebstats smile

Edited by BatBoy (Mon 20-Nov-17 13:11:38)

Standard User Roksan
(newbie) Mon 20-Nov-17 14:13:06
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
Hello: Looked in tenet & found:

Max: Upstream rate = 28707 Kbps, Downstream rate = 72320 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 71866 Kbps
Can I assume G.INP is not enabled?

Thank you !
Standard User MHC
(sensei) Mon 20-Nov-17 14:20:33
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: Roksan] [link to this post]
 
As BB says - dslstats and you can see everything without needing to run the telnet commands yourself.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit
Standard User Roksan
(newbie) Mon 20-Nov-17 14:25:21
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: MHC] [link to this post]
 
OK I'll do that, having a look at it - Thanks ...
Standard User BatBoy
(sensei) Mon 20-Nov-17 14:34:24
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: Roksan] [link to this post]
 
If you don't see

Max: Upstream rate = 28707 Kbps, Downstream rate = 72320 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 71866 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps

then G.INP isn't enabled.
Pages in this thread: 1 | 2 | 3 | 4 | 5 | (show all)   Print Thread

Jump to