General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | 4 | 5 | (show all)   Print Thread
Standard User Roksan
(newbie) Mon 20-Nov-17 16:07:48
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
No it's not there - All references to bearer have 0 - And for the final stupid question, is G.INP liable to be applied at some time? Is it because the modem was not G.INP enabled? I assume there is nothing I can do about this. I do know itís a Huawei cabinet as Iíve been in it when the cab lost the plot in the summer & needed a new card, had a cup of tea with the OpenReach men after midnight, you can see how far the cab is away as my cat was in the tent with the OR guys.
BTW replies are much appreciated smile

Edited by Roksan (Mon 20-Nov-17 16:08:58)

Standard User BatBoy
(sensei) Mon 20-Nov-17 16:25:57
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: Roksan] [link to this post]
 
Yes, it will be applied some time when DLM gets round to it, as long as it's a Huawei cab. Which exchange are you on?

When was the modem not G.INP enabled?
Standard User GonePostal
(regular) Mon 20-Nov-17 16:55:18
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
In reply to a post by BatBoy:
If you don't see

Max: Upstream rate = 28707 Kbps, Downstream rate = 72320 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 71866 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps

then G.INP isn't enabled.


I am now confused. I have a Billion 8800NL. The GUI is currently showing:

B0 Traffic Type PTM
B0 Line Rate - Upstream (Kbps) 19999
B0 Line Rate - Downstream (Kbps) 75414
B1 Traffic Type Inactive
B1 Line Rate - Upstream (Kbps) 0
B1 Line Rate - Downstream (Kbps) 0

However, it is also showing:

D (interleaver depth) 8 1
I (interleaver block size in bytes) 254 127
N (RS codeword size) 254 254
Delay (msec) 0 0
INP (DMT symbol) 48.00 0.00

According to a G.INP guide at https://www.increasebroadbandspeed.co.uk/g.inp, "It is possible to tell that G.INP has been implemented from your modem statistics, [. . . . . . ]. You can detect the existence of G.INP if the INP (DMT symbol) value is set to 48.0, with an interval depth or 8 or 16."

So my stats show B1 as inactive but the INP (DMT symbol) as 48 downstream with an interleave depth of 8.

Am I reading the stats correctly and getting the message that Bearer 1 is inactive but also G.INP is enabled for downstream (as per the linked report and contrary to BatBoy's statement) or am I reading things wrongly and BatBoy is correct that Bearer 1 is inactive so G.INP cannot be enabled?


Register (or login) on our website and you will not see this ad.

Standard User BatBoy
(sensei) Mon 20-Nov-17 17:05:08
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: GonePostal] [link to this post]
 
In reply to a post by GonePostal:
In reply to a post by BatBoy:
If you don't see

Max: Upstream rate = 28707 Kbps, Downstream rate = 72320 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 71866 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps

then G.INP isn't enabled.


I am now confused. I have a Billion 8800NL. The GUI is currently showing:
I was referring to the telnet output of the "xdslcmd info" command.
Standard User GonePostal
(regular) Mon 20-Nov-17 17:15:56
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
In reply to a post by BatBoy:
I was referring to the telnet output of the "xdslcmd info" command.


The Billion doesn't support xdslcmd.

xdslctl info --stats gives

Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 75414 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps

and then

Bearer 0
INP: 48.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 3.98
OR: 0.01 64.22
AgR: 75491.12 20063.54

Bearer 1
INP: 4.50 0.00
INPRein: 4.50 0.00
delay: 3 0
PER: 16.06 0.01
OR: 79.68 0.01
AgR: 79.68 0.01

Could you help me through those stats, please.
Standard User BatBoy
(sensei) Mon 20-Nov-17 17:26:31
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: GonePostal] [link to this post]
 
As you have a line for Bearer 1, you have G.INP enabled.

If you want help with the stats, I suggest you look at dslstats and mydslwebstats smile
Standard User GonePostal
(regular) Mon 20-Nov-17 17:30:44
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
In reply to a post by BatBoy:
As you have a line for Bearer 1, you have G.INP enabled.

If you want help with the stats, I suggest you look at dslstats and mydslwebstats smile


Thanks for the clarification. I failed to understand the import of your earlier

"If you don't see

Max: Upstream rate = 28707 Kbps, Downstream rate = 72320 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 71866 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps

then G.INP isn't enabled. "

My bad.
Standard User BatBoy
(sensei) Mon 20-Nov-17 17:37:24
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: GonePostal] [link to this post]
 
No problemo wink

Edited by BatBoy (Mon 20-Nov-17 17:37:54)

Standard User Roksan
(newbie) Mon 20-Nov-17 17:59:09
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
Hi: Exchange Chesterfield is served by Cabinet 87
Standard User BatBoy
(sensei) Mon 20-Nov-17 18:49:21
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: Roksan] [link to this post]
 
I checked https://www.telecom-tariffs.co.uk/codelook.htm?xid=8... and your cab is indeed a Huawei, so G.INP will be no problem wink
Pages in this thread: 1 | [2] | 3 | 4 | 5 | (show all)   Print Thread

Jump to