General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | [4] | 5 | (show all)   Print Thread
Standard User RobertoS
(elder) Tue 21-Nov-17 12:09:30
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: GonePostal] [link to this post]
 
In reply to a post by GonePostal:
In reply to a post by BatBoy:
If you don't see

Max: Upstream rate = 28707 Kbps, Downstream rate = 72320 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 71866 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps

then G.INP isn't enabled.


I am now confused. I have a Billion 8800NL. The GUI is currently showing:

B0 Traffic Type PTM
B0 Line Rate - Upstream (Kbps) 19999
B0 Line Rate - Downstream (Kbps) 75414
B1 Traffic Type Inactive
B1 Line Rate - Upstream (Kbps) 0
B1 Line Rate - Downstream (Kbps) 0

However, it is also showing:

D (interleaver depth) 8 1
I (interleaver block size in bytes) 254 127
N (RS codeword size) 254 254
Delay (msec) 0 0
INP (DMT symbol) 48.00 0.00

According to a G.INP guide at https://www.increasebroadbandspeed.co.uk/g.inp, "It is possible to tell that G.INP has been implemented from your modem statistics, [. . . . . . ]. You can detect the existence of G.INP if the INP (DMT symbol) value is set to 48.0, with an interval depth or 8 or 16."

So my stats show B1 as inactive but the INP (DMT symbol) as 48 downstream with an interleave depth of 8.

Am I reading the stats correctly and getting the message that Bearer 1 is inactive but also G.INP is enabled for downstream (as per the linked report and contrary to BatBoy's statement) or am I reading things wrongly and BatBoy is correct that Bearer 1 is inactive so G.INP cannot be enabled?
Bearer 1 is showing as 0Mbps because it connects at 200bps or 200kbps, I forget which. Rounded = 0Mbps.

The fact it is shown means it is active on the downstream. End of smile.

My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. 200GB. Sync 74145/13476Kbps @ 600m. BQMs - IPv4 & IPv6

Edited by RobertoS (Tue 21-Nov-17 12:11:27)

Standard User wolvesmad
(fountain of knowledge) Tue 21-Nov-17 12:40:21
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
Yes, exactly the same setup.

-

TalkTalk FTTC 60|20Mb
Standard User BatBoy
(sensei) Tue 21-Nov-17 12:59:07
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: wolvesmad] [link to this post]
 
Can you post the line stats or are you on MDWS?


Register (or login) on our website and you will not see this ad.

Standard User Roksan
(newbie) Tue 21-Nov-17 15:05:51
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: RobertoS] [link to this post]
 
In reply to a post by RobertoS:
What do you mean by "the latest firmware"? It should end in 30SP08, not 28SP10.

Sorry not sure if this was for me - My firmware does end in 30SP08 - The original file to upgrade was:
bcm96368MVWG_fs_kernel_HG612V100R001C01B030SP08_webgui Which is as far as I am aware is latest. smile
Standard User wolvesmad
(fountain of knowledge) Tue 21-Nov-17 15:15:42
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
I'll put the stats up later no problem.

I was thinking maybe the firmware may need re-flashing but it wouldn't make a difference really.

-

TalkTalk FTTC 60|20Mb
Standard User GonePostal
(regular) Tue 21-Nov-17 15:22:42
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: WWWombat] [link to this post]
 
@ WWWombat, @RobertoS

Thanks for the explanations. However, I finally understood what Bat Boy was saying and apologised to him for my stupidity at 17:30 yesterday. Post is there for you all to see if you track back.
Standard User BatBoy
(sensei) Tue 21-Nov-17 15:40:23
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: wolvesmad] [link to this post]
 
As long as you're on the latest fw as discussed above bcm96368MVWG_fs_kernel_HG612V100R001C01B030SP08_webgui then that's all you need.

I just find it uncanny that you're on the same cab as roksan.
Standard User wolvesmad
(fountain of knowledge) Sun 26-Nov-17 19:49:44
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: BatBoy] [link to this post]
 
Those are my stats - Huawei 384HD cab.

xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 26851 Kbps, Downstream rate = 58896 Kbps
Bearer: 0, Upstream rate = 20000 Kbps, Downstream rate = 59355 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.1 10.2
Attn(dB): 14.7 0.0
Pwr(dBm): 13.6 6.6
VDSL2 framing
Bearer 0
MSGc: 18 20
B: 239 239
M: 1 1
T: 64 64
R: 0 0
S: 0.1287 0.3819
L: 14920 5028
D: 1 1
I: 240 120
N: 240 240
Counters
Bearer 0
OHF: 1538202653 1412147
OHFErr: 5006 7029
RS: 0 2307790
RSCorr: 0 0
RSUnCorr: 0 0

Bearer 0
HEC: 5301 0
OCD: 142 0
LCD: 142 0
Total Cells: 1948977217 0
Data Cells: 995458261 0
Drop Cells: 0
Bit Errors: 0 0

ES: 3670 5283
SES: 2 1
UAS: 26 26
AS: 3179522

Bearer 0
INP: 0.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 2.06 6.13
OR: 92.88 33.91
AgR: 59447.78 20033.74

Bitswap: 975693/975693 685/685

Total time = 1 days 19 hours 12 min 28 sec
FEC: 0 0
CRC: 5006 7029
ES: 3670 5283
SES: 2 1
UAS: 26 26
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 12 min 28 sec
FEC: 0 0
CRC: 1 0
ES: 1 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 0 0
CRC: 3 4
ES: 3 3
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 19 hours 12 min 28 sec
FEC: 0 0
CRC: 135 152
ES: 118 94
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 0 0
CRC: 135 147
ES: 113 118
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 36 days 19 hours 12 min 1 sec
FEC: 0 0
CRC: 5006 7029
ES: 3670 5283
SES: 2 1
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#

-

TalkTalk FTTC 60|20Mb
Standard User BatBoy
(sensei) Sun 26-Nov-17 20:09:31
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: wolvesmad] [link to this post]
 
Iím only guessing but it looks like you have a super stable line
Itís been up 36 days on fast path
Maybe DLM doesnít think you need g.inp
Standard User RobertoS
(elder) Sun 26-Nov-17 20:13:32
Print Post

Re: Huawei EchoLife HG612 - Is G.INP Enabled?


[re: wolvesmad] [link to this post]
 
"D: 1 1"

Currently on Fast Path both downstream and upstream. You don't need G.INP.

Explanation - D(epth) of interleaving is 1, which means that each packet's data is spread over one packet. I.e. it isn't interleaved.

My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. 200GB. Sync 74145/13476Kbps @ 600m. BQMs - IPv4 & IPv6
Pages in this thread: 1 | 2 | 3 | [4] | 5 | (show all)   Print Thread

Jump to