User comments on ISPs
  >> Hyperoptic


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User TBUser2012
(newbie) Fri 07-Apr-17 16:50:54
Print Post

Bending Cat5e


[link to this post]
 
I recently had a very friendly Hyperoptic engineer install the service, with sharp 90 degree bends of the cable when going through the wall and around door frames (where the cable is visibly 'flatter'), in addition to softer 'internal' bends where there are distinct curves as opposed to 'folds'. I'd guess the total length from the socket to the front door is just over 15m, with (coincidentally) 15 bends.

I've read conflicting stories about just how safe it is to bend Cat5e cables, although the standard bend radius appears to be four times the diameter of the cable. Will I encounter issues with performance as times goes by? My initial speed test was 920 / 844.
Administrator MrSaffron
(staff) Fri 07-Apr-17 19:16:45
Print Post

Re: Bending Cat5e


[re: TBUser2012] [link to this post]
 
Cat5e cable can take some serious abuse, so should be good for a good number of years once fixed in place.

Its sitting there flexing it a lot that might cause issues.

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
  Print Thread

Jump to