Technical Discussion
  >> Home Networking, Internet Connection Sharing, etc.


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User keith_thfc
(knowledge is power) Tue 23-Aug-11 07:23:36
Print Post

Viewing line stats in bridge mode


[link to this post]
 
I put my Be* Thomson TG585v7 into bridge mode last night to test a new router through it but now I can't access my normal TG585v7 router landing/management page, http://192.168.1.254/

It just hangs if I try to access it now.

Is there something simple I can do to see this? Just want to check my sync speed but if I log on to my new Netgear router page the up/down speeds are blank (presumably because its connecting via the TG585v7).

Many thanks.

-----------------------------------------------------
be* Value (be* since Jan 2006)
3.5 Mb down/1 Mb up using Thomson TG585
Poplar (LNPOP) exchange

(ex Wanadoo/AOL/Zen/f2s LLU)
Standard User MHC
(legend) Tue 23-Aug-11 07:51:51
Print Post

Re: Viewing line stats in bridge mode


[re: keith_thfc] [link to this post]
 
I wonder if it is similar to the 2wire2700s in bridge mode. When they are put into bridge mode it is NOT possible to access the management pages including stats from the LAN, what is needed is to manually set the PC IP address (192.168.1.250 or 192.168.1.1 as there will be no DHCP server running) and then plug it in to the modem/router directly.





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


M H C


taurus excreta cerebrum vincit
Standard User OCdragon
(experienced) Tue 23-Aug-11 10:14:33
Print Post

Re: Viewing line stats in bridge mode


[re: MHC] [link to this post]
 
Or resetting your "Thomson TG585v7" to its Factory Default may help!

Intel E4300 OC with 2GB RAMs,Speedtouch 585 Modem/Router and Windows XP Pro

O2 Standard ADSL2+ Broadband!


Register (or login) on our website and you will not see this ad.

Standard User keith_thfc
(knowledge is power) Tue 23-Aug-11 10:52:14
Print Post

Re: Viewing line stats in bridge mode


[re: OCdragon] [link to this post]
 
In reply to a post by OCdragon:
Or resetting your "Thomson TG585v7" to its Factory Default may help!
Thanks but if I do that then it will reset itself to normal (non-bridge) mode which I don't want to do at the moment.

-----------------------------------------------------
be* Value (be* since Jan 2006)
3.5 Mb down/1 Mb up using Thomson TG585
Poplar (LNPOP) exchange

(ex Wanadoo/AOL/Zen/f2s LLU)
Standard User MHC
(legend) Tue 23-Aug-11 10:52:20
Print Post

Re: Viewing line stats in bridge mode


[re: OCdragon] [link to this post]
 
In reply to a post by OCdragon:
Or resetting your "Thomson TG585v7" to its Factory Default may help!

reset to default will take it out of bridge mode ...





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


M H C


taurus excreta cerebrum vincit
Standard User keith_thfc
(knowledge is power) Tue 23-Aug-11 10:55:53
Print Post

Re: Viewing line stats in bridge mode


[re: MHC] [link to this post]
 
In reply to a post by MHC:
I wonder if it is similar to the 2wire2700s in bridge mode. When they are put into bridge mode it is NOT possible to access the management pages including stats from the LAN, what is needed is to manually set the PC IP address (192.168.1.250 or 192.168.1.1 as there will be no DHCP server running) and then plug it in to the modem/router directly.
Are you saying that I would have to disconnect my PC to Netgear ethernet connection and reconnect my PC to the bridge mode TG585v7 to see the stats?

That makes sense actually but is a fair bit of hassle to do every time I want to check my stats.

Assume there is no easier way that doesn't involve me having to unplug any connections?

-----------------------------------------------------
be* Value (be* since Jan 2006)
3.5 Mb down/1 Mb up using Thomson TG585
Poplar (LNPOP) exchange

(ex Wanadoo/AOL/Zen/f2s LLU)
Standard User Adsl24
(fountain of knowledge) Tue 23-Aug-11 11:05:11
Print Post

Re: Viewing line stats in bridge mode


[re: keith_thfc] [link to this post]
 
As others suggest, you would need to manually set the IP on your PC's network card to 192.168.1.2, with a subnet of 255.255.255.0 and a gateway of the thomson router, e.g. 192.168.1.254 - you can then go to 192.168.1.254 in your browser.

Note that you need to revert these manual IP settings once done. Not ideal but will work.

James
ADSL24 Broadband
http://adsl24.co.uk
Standard User keith_thfc
(knowledge is power) Tue 23-Aug-11 11:59:19
Print Post

Re: Viewing line stats in bridge mode


[re: Adsl24] [link to this post]
 
In reply to a post by Adsl24:
As others suggest, you would need to manually set the IP on your PC's network card to 192.168.1.2, with a subnet of 255.255.255.0 and a gateway of the thomson router, e.g. 192.168.1.254 - you can then go to 192.168.1.254 in your browser.

Note that you need to revert these manual IP settings once done. Not ideal but will work.
Thanks for that.

-----------------------------------------------------
be* Value (be* since Jan 2006)
3.5 Mb down/1 Mb up using Thomson TG585
Poplar (LNPOP) exchange

(ex Wanadoo/AOL/Zen/f2s LLU)
Standard User Adsl24
(fountain of knowledge) Tue 23-Aug-11 12:01:20
Print Post

Re: Viewing line stats in bridge mode


[re: keith_thfc] [link to this post]
 
No problem.

Thinking about it, you could simply add the 192.168.1.2 as a secondary IP (in Windows), and add a secondary gateway of 192.168.1.254 - setting the metric of this to 2, and the metric of your normal IP to 1.

James
ADSL24 Broadband
http://adsl24.co.uk
Standard User keith_thfc
(knowledge is power) Tue 23-Aug-11 15:44:53
Print Post

Re: Viewing line stats in bridge mode


[re: Adsl24] [link to this post]
 
In reply to a post by Adsl24:
No problem.

Thinking about it, you could simply add the 192.168.1.2 as a secondary IP (in Windows), and add a secondary gateway of 192.168.1.254 - setting the metric of this to 2, and the metric of your normal IP to 1.
Thanks.

Someone on another forum suggested you could use another ethernet cable to connect the two devices via LAN ports and then you would be able to see the line stats on the bridged device (TG585v7).

Not at home to test this right now - but does that sound like it would work?

-----------------------------------------------------
be* Value (be* since Jan 2006)
3.5 Mb down/1 Mb up using Thomson TG585
Poplar (LNPOP) exchange

(ex Wanadoo/AOL/Zen/f2s LLU)
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to