User comments on ISPs
  >> Other Providers (without dedicated forums)


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User durkasmurk
(regular) Tue 05-Apr-16 07:38:48
Print Post

G.INP enabled on my line but speedtests remain the same


[link to this post]
 
Confused here guys so need some clarification.

G.INP got recently enabled on my line and my stats are now 78967 down 18835 up but when I do speedtests from www.speedtest.net or www.thinkbroadband.com it peaks at 60-65mbit which is the same as it was before G.INP when it was synced at 69997 down.

I would of thought that I would be seeing around 70mbit + down now as the sync rate has increased?

What are the over heads for FTTC as I know VM synced at 160mbit or so to give me 152mit so I assume you have to knock off a few mbits here and there to get the actual maximum throughput but I am unsure what this figure is.

The speedtests are also the same 24/7 it peaks at 60-65mbit and that's it maxed out and I have never seen anymore than this.

http://www.thinkbroadband.com/speedtest/results.html...
http://www.speedtest.net/my-result/5225681410

P.S Using 1gbit powerline adapters and they are synced at 255mbit each way.

And some stats thrown in for good measure.

adslctl info --stats
adslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 18776 Kbps, Downstream rate = 79500 Kbps
Bearer: 0, Upstream rate = 18835 Kbps, Downstream rate = 78967 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.1 6.0
Attn(dB): 18.1 0.0
Pwr(dBm): 13.8 6.8

VDSL2 framing
Bearer 0
MSGc: -6 13
B: 243 238
M: 1 1
T: 0 62
R: 6 16
S: 0.0984 0.4040
L: 20327 5050
D: 1 1
I: 250 255
N: 250 255
Q: 8 0
V: 0 0
RxQueue: 64 0
TxQueue: 16 0
G.INP Framing: 18 0
G.INP lookback: 16 0
RRC bits: 0 24
Bearer 1
MSGc: 186 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 5.3333 0.0000
L: 48 0
D: 3 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0

Counters
Bearer 0
OHF: 0 798828
OHFErr: 6 39
RS: 2701615848 1209449
RSCorr: 2855652 112470
RSUnCorr: 0 0
Bearer 1
OHF: 10756357 0
OHFErr: 0 0
RS: 129075549 0
RSCorr: 357 0
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 866762 0
rtx_c: 762634 0
rtx_uc: 15 0

G.INP Counters
LEFTRS: 0 0
minEFTR: 78945 0
errFreeBits: 207873093 0

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 441531381 0
Data Cells: 640869420 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 3 39
SES: 0 0
UAS: 28 28
AS: 172772

Bearer 0
INP: 49.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 6.28
OR: 0.01 24.18
AgR: 79047.82 18858.88

Bearer 1
INP: 4.00 0.00
INPRein: 4.00 0.00
delay: 3 0
PER: 16.06 0.01
OR: 95.62 0.01
AgR: 95.62 0.01

Bitswap: 14286/16495 0/0

Total time = 2 days 0 sec
FEC: 2855652 112470
CRC: 6 39
ES: 3 39
SES: 0 0
UAS: 28 28
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Latest 15 minutes time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Previous 15 minutes time = 15 min 0 sec
FEC: 1557 15
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: N/A
Latest 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Previous 1 day time = 24 hours 0 sec
FEC: 643817 90260
CRC: 1 15
ES: 1 15
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Since Link time = 1 days 23 hours 59 min 31 sec
FEC: 2855652 112470
CRC: 6 39
ES: 3 39
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0
#
# ]

Edited by durkasmurk (Tue 05-Apr-16 07:51:08)

Standard User BatBoy
(sensei) Tue 05-Apr-16 08:01:58
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: durkasmurk] [link to this post]
 
If you're running the tests through the powerline adapters then they are almost certainly limiting your speed.

Try testing over an ethernet cable wired directly between your PC and the router.
Standard User durkasmurk
(regular) Tue 05-Apr-16 08:06:04
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: BatBoy] [link to this post]
 
Not sure that's the case when I was on VM I got 150mbit (before they way oversold in my area) all day long with the same powerline adapters in the same socket(s).

Stuck profile perhaps?


Register (or login) on our website and you will not see this ad.

Standard User BatBoy
(sensei) Tue 05-Apr-16 08:14:22
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: durkasmurk] [link to this post]
 
You should try it with an ethernet cable cable anyway, just to rule out the powerline adapters.
And turn them off, they have been known radiate interference as well.
Standard User RobertoS
(elder) Tue 05-Apr-16 10:10:40
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: durkasmurk] [link to this post]
 
If you mean the BT Wholesale IP Profile, that isn't operative on your line.

It might help to see the normal thinkbroadband speed test from the Main Site that does a single thread test as well as the multi-thread.

Kindness isn't going to cure the world of all its awfulness but it's a good place to begin. Daisy Ridley.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. Sync 59504/15641kbps @ 600m. - BQM

Edited by RobertoS (Tue 05-Apr-16 10:11:00)

Standard User durkasmurk
(regular) Tue 05-Apr-16 10:59:28
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: RobertoS] [link to this post]
 
Single thread test I believe

http://www.thinkbroadband.com/speedtest/button/14598...

Multithreaded test

http://www.thinkbroadband.com/speedtest/results.html...

Edited by durkasmurk (Tue 05-Apr-16 11:01:02)

Standard User greenglide
(experienced) Tue 05-Apr-16 13:02:45
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: durkasmurk] [link to this post]
 
How do people know that G.INP has been enabled on their line?

I have an HG612 with old firmware (at least it is a while sine I updated it) and an ECI CAB.

If I could "know" that G.INP was enabled I would think about upgrading the firmware etc but it isnt that straightforward - to access the HG612 configuration page means disconnected one of the other connections behind the music centre! Unfortunately of the four CAT6 cables running down there only two actually work and I havent got round to tracing the problem!

BT Infinity 2 - IP profile 77 / 20 - super fast!
Previously BE Unlimited - 21,000 Download 1,200 Upload but then moved house - 6,500 Down, 1Mb/s up - gutted!
Ex <n>ildram , been to SKY MAX - 15,225 Download
Standard User BatBoy
(sensei) Tue 05-Apr-16 13:16:06
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: greenglide] [link to this post]
 
You can only know by looking at the stats, so you'll have to upgrade the firmware first.
Standard User greenglide
(experienced) Tue 05-Apr-16 22:34:33
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: BatBoy] [link to this post]
 
I had thought that would be the case.

May need to see what is wrong with the two ports that never worked since being installed (a year or more ago). At least I could monitor the stats properly.

Patch panel, cable or face plate.

Joy.

BT Infinity 2 - IP profile 77 / 20 - super fast!
Previously BE Unlimited - 21,000 Download 1,200 Upload but then moved house - 6,500 Down, 1Mb/s up - gutted!
Ex <n>ildram , been to SKY MAX - 15,225 Download
Standard User durkasmurk
(member) Wed 06-Apr-16 07:55:16
Print Post

Re: G.INP enabled on my line but speedtests remain the same


[re: greenglide] [link to this post]
 
Plugged in my tplink wireless ac1200 dongle which was collecting dust in my drawer and hey presto the first speed test hit 73 down and 18 up, unplugged the dongle and ran another speedtest 59 down 18 up and no more no less.

Verdict - Powerline adapters are NO replacement for a good physical connection or in my case a wireless connection!

I may play about and see if I can plug in the powerline adapters into another socket but now I know my line is not capped or whatever the term is losing a few mbits is not going to cause me any harm whatsoever.
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to