User comments on ISPs
  >> TalkTalk Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User naheed_akhtar
(newbie) Wed 16-May-12 21:49:39
Print Post

WHY IS MY SPEED SO SLOW


[link to this post]
 
hello everybody hope someone can explain or even help me. I am with talk talk and before i took out the intenet i did a test from verious compa ies on line speed and was told the lowest i would get was 2.5mb i am not connected on fibre optics as it isnt available where i live but i have the talk talk plus package here is some info from my router

Interface Transmit Receive
Bytes Pkts Errs Drops Bytes Pkts Errs Drops
LAN: 1257696633 984335 0 0 62232500 736721 0 0
WAN:  60201784 727314 0 2 1240150966 969374 0 0
Wireless:  1206673462 875934 0 0 444736650 2085704 7 0

ADSL STATUS
Line State Up
Modulation ADSL2
Annex Mode AnnexA
Downstream Upstream
Data Rate 1433 533
Maximum Attainable Data Rate(ATTNDR) 1620 540
Interleaver Depth 16 2
Line Attenuation(LATN) 44.0 36.2
Signal Attenuation(SATN)
Signal-to-Noise Ratio Margin(SNRM) 9.1 11.7
Actual Aggregate Transmit Power(ACATP) 0 12
Near End Far End
LOS Failure
LOF Failure
LPR Failure
NCD Failure
LCD Failure
CRC 0 0
RS Correction
Forward Error Correction Seconds(FECS-L)
Errored Second(ES-L)
Serverely Errored Seconds(SES-L)
Loss of Signal Seconds(LOSS-L)
Unavailable Seconds(UAS-L)
HEC Error 0 0

ADSL STATISTICS
Mode Routing
ADSL Mode ADSL2
ADSL Type Annex A
Status Up

Downstream Upstream
Rate(Kbps) 1433 533

SNR Margin(dB) 9.1 11.7
Attenuation(dB) 36.2 44.0
Output Power(dBm) 0 12

Super Frames 6287293 6287293
RS Correctable Errors 64960 0
RS Uncorrectable Errors 0 0

HEC Errors 0 0
Total Cells 12771 60444
Data Cells 26900387 1976263
Bit Errors 0 0
Standard User Myth
(member) Thu 17-May-12 04:19:26
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: naheed_akhtar] [link to this post]
 
In reply to a post by naheed_akhtar:
i took out the intenet


I wondered why piratebay wasn't working wink

Have you tested the router direct into the test socket behind your BT socket faceplate?

For reference here's my router stats. I have higher attenuation (longer line probably) than you but much higher bandwidth. Your SNRM can be dropped from 12 to 6, but your stats seem to point to another issue that should be solved first:

Uptime: 0 days, 0:41:29
DSL Type: G.992.3 annex A
Bandwidth (Up/Down) [kbps/kbps]: 884 / 3,691
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.5 / 0.0
Line Attenuation (Up/Down) [dB]: 29.0 / 55.0
SN Margin (Up/Down) [dB]: 6.0 / 6.0
Vendor ID (Local/Remote): TMMB / IFTN
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): NA / 26,088
CRC Errors (Up/Down): NA / 11
HEC Errors (Up/Down): 0 / 11

In theory, theory and practice are identical.....in practice they aren't!
Standard User naheed_akhtar
(newbie) Thu 17-May-12 13:15:30
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: Myth] [link to this post]
 
i have router connected to master socket as far as i know and was acheieving this speed from the beginning had the internet for a month now. Do you mean remove the faceplate and then connect the router to master socket i have not tried this, i achieve this speed on wireless and wired connection. also according to internet checks i am 2.5 miles away from the exchange

Edited by naheed_akhtar (Thu 17-May-12 13:21:30)


Register (or login) on our website and you will not see this ad.

Standard User Myth
(member) Thu 17-May-12 13:21:31
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: naheed_akhtar] [link to this post]
 
yes, if you have an NTE5 master socket, remove the faceplate and plug direct into the test socket behind. This should rule out home wiring from your enquiries

In theory, theory and practice are identical.....in practice they aren't!
Standard User naheed_akhtar
(newbie) Thu 17-May-12 13:54:16
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: Myth] [link to this post]
 
master socket was upstaris i got a pic off the net as to how it should look and in the right hand corner there is a t but took off the faceplate and connected direct and it instantly went up from 1.2mb too 2..08mb but i have to put faceplate back on dont i, back to 1.2mb when master faceplate back on

Edited by naheed_akhtar (Thu 17-May-12 13:55:31)

Standard User Zadeks
(experienced) Thu 17-May-12 13:56:56
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: naheed_akhtar] [link to this post]
 
You can keep it in the test socket if you don't need the extensions connected.
Standard User naheed_akhtar
(newbie) Thu 17-May-12 14:03:18
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: Zadeks] [link to this post]
 
my new router stats

Mode Routing
ADSL Mode ADSL2
ADSL Type Annex A
Status Up

Downstream Upstream
Rate(Kbps) 2354 484

SNR Margin(dB) 11.6 12.0
Attenuation(dB) 37.7 63.0
Output Power(dBm) 0 12

Super Frames 7721 7722
RS Correctable Errors 2293 0
RS Uncorrectable Errors 0 0

HEC Errors 0 0
Total Cells 3 1
Data Cells 76719 17658
Bit Errors 0 0
Standard User naheed_akhtar
(newbie) Thu 17-May-12 14:05:17
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: Zadeks] [link to this post]
 
you mean leave the faceplate off i did want to have the router downstairs but guess i will leave it in the test socket would this just mean that the faceplate needs changing and coluld their ossibly be anway to get any faster internet. it is now hitting 2mb which is better than 1.2mb but it says i can achieve 2.5mb.

Edited by naheed_akhtar (Thu 17-May-12 14:14:44)

Standard User Deadbeat
(knowledge is power) Thu 17-May-12 14:34:48
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: naheed_akhtar] [link to this post]
 
You have an internal cabling fault. Either repair it yourself with help from these boards or use a competent person with experience of telephone wiring.
If you pester your ISP for a repair it will cost you £130 minimum and you probably still won't get it repaired.
Administrator MrSaffron
(staff) Thu 17-May-12 16:53:40
Print Post

Re: WHY IS MY SPEED SO SLOW


[re: Deadbeat] [link to this post]
 
If things are better at the test socket then try http://www.thinkbroadband.com/faq/sections/radsl.htm...

The wire on pin 3 can introduce noise and slow you down just as youve seen. If that is too much, then an alternate that will cost £5 to £10 is to fit an i-plate http://www.thinkbroadband.com/videos/iplate-installa...

Andrew Ferguson, andrew@thinkbroadband.com
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to