User comments on ISPs
  >> TalkTalk Broadband


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User andrum99
(newbie) Sat 15-Aug-15 21:03:28
Print Post

Command Line on DSL-3780 router?


[link to this post]
 
Is there a command line interface (telnet or SSH) available on the DSL-3780 router? The DHCP address reservation in the web UI is a bit annoying and insists on only reserving an address it has already assigned to a device - I cannot choose which IP address to reserve for a device. I'm hoping the router has a CLI I can access, otherwise I will need to buy another router.
Standard User Kaoshan
(committed) Sun 16-Aug-15 08:08:48
Print Post

Re: Command Line on DSL-3780 router?


[re: andrum99] [link to this post]
 
Look here for full details.
Standard User arobertson545
(member) Sun 16-Aug-15 12:30:51
Print Post

Re: Command Line on DSL-3780 router?


[re: andrum99] [link to this post]
 
TalkTalk won't officially support telnet.

On the Huawei HG635 there was a way to enable telnet but it required some digging.

If there's source code released for the D-Link DSL-3780 then you might be able to enable it.


Register (or login) on our website and you will not see this ad.

Standard User andrum99
(newbie) Wed 19-Aug-15 00:41:53
Print Post

Re: Command Line on DSL-3780 router?


[re: Kaoshan] [link to this post]
 
I ended up just buying another router. Apparently the DSL-3780 is another one with SNMP disabled as well, at the behest of the ISP grrr. I'm now using an Asus DSL-N10 C1 which is working well so far.
  Print Thread

Jump to