Anyone got any clues on this?
<166>Jul 26 20:19:54 gateway: WAN1 PPPoE ==> Protocol:LCP(c021) EchoRep Identifier:0xE4Magic Number: 0x0 00 00 00 00 00 00 ##
<166>Jul 26 20:19:55 gateway: WAN1 PPPoE <== Protocol:LCP(c021) EchoReq Identifier:0xE5Magic Number: 0x438d cc 59 00 00 00 00 ##
<166>Jul 26 20:19:55 gateway: WAN1 PPPoE ==> Protocol:LCP(c021) EchoRep Identifier:0xE5Magic Number: 0x0 00 00 00 00 00 00 ##
<174>Jul 26 20:19:59 gateway: ADSL_Status:[Mode=G.DMT States=SHOWTIME UpSpeed=864000 DownSpeed=7616000 SNR=7 Atten=30 ]
<166>Jul 26 20:20:01 gateway: WAN1 PPPoE <== Protocol:LCP(c021) TermReq Identifier:0x01 ##
<158>Jul 26 20:20:01 gateway: PPP Closed : Remote Terminating (PPPoA)
<166>Jul 26 20:20:01 gateway: WAN1 PPPoE ==> Protocol:LCP(c021) TermAck Identifier:0x01 ##
<166>Jul 26 20:20:01 gateway: WAN 1 is down.
<166>Jul 26 20:20:02 gateway: WAN1 PPPoE ==> V:1 T:1 PADI ID:0
<166>Jul 26 20:20:02 gateway: WAN1 PPPoE <== V:1 T:1 PADO ID:0
<158>Jul 26 20:20:02 gateway: >>> Dial-up triggered by user : 192.168.1.5 ; proto=UDP, to 173.93.206.128 port=17365
<174>Jul 26 20:20:04 gateway: ADSL_Status:[Mode=G.DMT States=SHOWTIME UpSpeed=864000 DownSpeed=7616000 SNR=7 Atten=30 ]
<166>Jul 26 20:20:05 gateway: WAN1 PPPoE <== V:1 T:1 PADO ID:0
<166>Jul 26 20:20:05 gateway: WAN1 PPPoE ==> V:1 T:1 PADR ID:0
<166>Jul 26 20:20:05 gateway: WAN1 PPPoE <== V:1 T:1 PADS ID:6
<166>Jul 26 20:20:05 gateway: WAN1 PPPoE ==> V:1 T:1 PADT ID:6
<166>Jul 26 20:20:08 gateway: WAN1 PPPoE <== V:1 T:1 PADS ID:6
<158>Jul 26 20:20:08 gateway: PPP Start (PPPoA)
its the debug from a colleagues 2820 Draytek router - link bounces every 10 minutes or so. Doesn't +appear+ to be a line issue but to be honest not sure. It was running 3.3.3 with the UK firmware. Tried 3.3.4 with the UK firmware no difference so tried 3.3.4 with the standard firmware - still no difference.
Neil.



Print Thread
Neil123