Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User faz1964
(learned) Mon 14-Feb-11 08:17:00
Print Post

High Error Rate


[link to this post]
 
Hi

Looking at my BT Homehub 2 stats there are hundreds of thousands of errors.

Is this normal?

ADSL line status

Connection Information

Line state Connected
Connection time 11 days, 18:05:44
Downstream 2,528 Kbps
Upstream 448 Kbps

ADSL Settings

VPI/VCI 0/38
Type PPPoA
Modulation G.992.1 Annex A
Latency type Interleaved
Noise margin (Down/Up) 6.9 dB / 13.0 dB
Line attenuation (Down/Up) 58.3 dB / 31.5 dB
Output power (Down/Up) 4.0 dBm / 1.3 dBm
Loss of Framing (Local/Remote) 0 / 0
Loss of Signal (Local/Remote) 0 / 0
Loss of Power (Local/Remote) 0 / 0
FEC Errors (Down/Up) 26766 / 2420
CRC Errors (Down/Up) 35799 / 1323
HEC Errors (Down/Up) 537810 / 907
Error Seconds (Local/Remote) 38682 / 1565
Standard User b4dger
(knowledge is power) Mon 14-Feb-11 09:25:24
Print Post

Re: High Error Rate


[re: faz1964] [link to this post]
 
Errors aren't good (esp. the error seconds) - but as your router has been up for 11 days it's tricky so say if you've a line problem or not.

It only takes one strange event (storm / BT engineer / dodgy electrical kit / etc) to rack up large numbers of errors.

I would start be rebooting your router and monitoring from a fresh start to try to see what's going on.

  Print Thread

Jump to