Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User aquilla
(knowledge is power) Sat 14-May-11 18:35:04
Print Post

Cisco 877 and LLU question


[link to this post]
 
Hi all,

Does anyone know however a Cisco 877 router will perform on LLU (namely C&W) with regards to stability on ADSL2+?

At the moment I am on ADSL2+ with Zen (BT WBC) and the Cisco 877 will not hold a connection for long (Cisco have released a firmware patch, but this has given mixed results from the users). As a result I have a Draytek 120 modem handling the sync.

I'm about to jump ship to Xilo Pro 16 which uses C&W LLU and was wondering if this will be any better with the Cisco.

Regards,

Stuart

Zen Pro - "Up to 20Mbit Broadband"
Standard User Rockh
(eat-sleep-adslguide) Sat 14-May-11 19:32:22
Print Post

Re: Cisco 877 and LLU question


[re: aquilla] [link to this post]
 
Have 1801 which is the same chipset as the 877 and it had it working ok on Sky LLU and O2 LLU, syncs a few meg lower than other hardware though so do the same and have a speedtouch in bridge mode handling the connection.

Dave
Standard User muffymeister
(learned) Tue 17-May-11 17:25:29
Print Post

Re: Cisco 877 and LLU question


[re: aquilla] [link to this post]
 
ive got an 877w on O2 LLU, i get around 1.5Mb lower sync compared to speedtouch, but more stable. I tweaked my noise margin to -1 and achieved (0.5Mb less) similar speeds to the speedtouch

i also found FW Version 4.0.17 to be better for me, hope that helps


Register (or login) on our website and you will not see this ad.

  Print Thread

Jump to