Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User lgvtxguy
(newbie) Wed 26-Mar-14 16:52:10
Print Post

[RJ11 Connector]


[link to this post]
 
Is there a way to remove rj11 connector from wire to replace without cutting the actual wire? The reason is I don't have much slack to cut then retrim to crimp a new connector. Thanks in Advanced
Administrator MrSaffron
(staff) Wed 26-Mar-14 16:54:39
Print Post

Re: [RJ11 Connector]


[re: lgvtxguy] [link to this post]
 
With the standard RJ11 crimp connectors not really, unless you carefully dissect the connector with much risk from pointy objects

New RJ11 leads can be had cheap enough to avoid this hassle generally.

Andrew Ferguson, andrew@thinkbroadband.com
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User ian72
(knowledge is power) Wed 26-Mar-14 20:03:36
Print Post

Re: [RJ11 Connector]


[re: lgvtxguy] [link to this post]
 
If you don't need the connector then about the only way would be to attempt destruction of it using pliers or similar - but you could damage the wire so much that it may have to be cut short anyway.


Register (or login) on our website and you will not see this ad.

Standard User vivaciti
(knowledge is power) Thu 27-Mar-14 12:19:04
Print Post

Re: [RJ11 Connector]


[re: lgvtxguy] [link to this post]
 
Might be easier to buy another rj11 and get a coupler to join the two together.

www.vivaciti.net
Vivaciti Broadband
0800 0911797

Forum
Facebook
  Print Thread

Jump to