Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User Malwaremike
(committed) Thu 01-Jun-17 11:13:31
Print Post

Re: How to get a decent master socket installed in old prope


[re: jez9999] [link to this post]
 
Not sure, Jez, if you have already approached your ISP regarding this. If not, have you inspected your ancient socket very closely, using a hammer if necessary? It might have been damaged by the previous owner of your new house and if so it will need replacement as part of your new installation.
Standard User ian72
(eat-sleep-adslguide) Thu 01-Jun-17 11:24:00
Print Post

Re: How to get a decent master socket installed in old prope


[re: Malwaremike] [link to this post]
 
And if it was "accidentally" damaged then BT may still charge to replace - believe that has happened before even when the faceplate was actually damaged before the person moved in.
Administrator MrSaffron
(staff) Thu 01-Jun-17 13:12:48
Print Post

Re: How to get a decent master socket installed in old prope


[re: ian72] [link to this post]
 
Precisely because of things like the other poster is suggesting

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.


Register (or login) on our website and you will not see this ad.

Standard User ian72
(eat-sleep-adslguide) Thu 01-Jun-17 13:56:59
Print Post

Re: How to get a decent master socket installed in old prope


[re: MrSaffron] [link to this post]
 
Indeed. A dangerous thing to advise, especially on an open forum.
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to