User comments on ISPs
  >> Virgin Media (Cable)


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User christoskelton
(newbie) Fri 20-Nov-15 10:10:04
Print Post

Using a switch with Superhub 2


[link to this post]
 
Is anyone out there using a switch with the Superhub 2? If so, was there anything special about setting it up?

Christo Skelton
Virgin Media with Superhub 2 ac
Administrator MrSaffron
(staff) Fri 20-Nov-15 11:15:23
Print Post

Re: Using a switch with Superhub 2


[re: christoskelton] [link to this post]
 
An Ethernet switch if consumer grade kit will not have any configuration to it at all, so what model of switch are you referring to?

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User christoskelton
(newbie) Fri 20-Nov-15 11:25:00
Print Post

Re: Using a switch with Superhub 2


[re: MrSaffron] [link to this post]
 
Ah OK. It is a TP Link TL-SF1016D
Thanks for the response.

Christo Skelton
Virgin Media with Superhub 2 ac


Register (or login) on our website and you will not see this ad.

Administrator MrSaffron
(staff) Fri 20-Nov-15 13:48:49
Print Post

Re: Using a switch with Superhub 2


[re: christoskelton] [link to this post]
 
So its a simple switch plug in one cable from superhub, and then fill the other ports on the switch with cables from your other devices and no configuration needed.

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User christoskelton
(newbie) Fri 20-Nov-15 13:56:30
Print Post

Re: Using a switch with Superhub 2


[re: MrSaffron] [link to this post]
 
I have got it working thanks.

Christo Skelton
Virgin Media with Superhub 2 ac
  Print Thread

Jump to