User comments on ISPs
  >> Virgin Media (Cable)


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User Bryer
(experienced) Tue 10-May-16 10:53:51
Print Post

Superhub 3.0 Firmware update


[link to this post]
 
Hi all,

Did anyone else notice about 30 minutes of downtime for a firmware update last night? My superhub dropped connection last night and now modem mode shows in purple on the front of the device.

Jitter is still present, but speeds are slightly higher.
Standard User arronlowley
(newbie) Tue 10-May-16 17:05:13
Print Post

Re: Superhub 3.0 Firmware update


[re: Bryer] [link to this post]
 
mine has just updated after taking it out of modem mode.

there is little to no change in ping spikes etc.
Standard User mikehiow
(committed) Tue 10-May-16 19:16:32
Print Post

Re: Superhub 3.0 Firmware update


[re: Bryer] [link to this post]
 
Mine died at 15:10 and take 10-15 minutes.

I've noticed now that just the main LED is lit purple now (modem mode) and no other lights are lit.

Goodbye Sky 10/1 frown Hell 1gbps Hyperoptic


Register (or login) on our website and you will not see this ad.

Standard User mlmclaren
(knowledge is power) Tue 10-May-16 21:04:01
Print Post

Re: Superhub 3.0 Firmware update


[re: Bryer] [link to this post]
 
Could anyone share a BQM to compare to the older versions of Hub?

BTInfinity - 69000/20000kbps Formerly 116000/31000 - Quality Monitor - Quality Monitor 2
VirginMedia - 77000/5250kbps - BQM L1 - BQM L2
Standard User mikehiow
(committed) Tue 10-May-16 23:24:49
Print Post

Re: Superhub 3.0 Firmware update


[re: mlmclaren] [link to this post]
 
I don't know if this is what you mean, but here's mine, just as terrible before and after firmware upgrade.

http://www.thinkbroadband.com/ping/share/3f2cfdf8922...

Goodbye Hyperoptic. Now VM200 frown
Standard User mlmclaren
(knowledge is power) Wed 11-May-16 01:41:13
Print Post

Re: Superhub 3.0 Firmware update


[re: mikehiow] [link to this post]
 
Err yuck... Might well stick with SH2's then... How you finding the performance of the Hub 3 and is there more than 8 downstream channels locked or is it still using 8 for the time being?

BTInfinity - 69000/20000kbps Formerly 116000/31000 - Quality Monitor - Quality Monitor 2
VirginMedia - 77000/5250kbps - BQM L1 - BQM L2
Standard User Mark07
(regular) Wed 11-May-16 09:42:34
Print Post

Re: Superhub 3.0 Firmware update


[re: mlmclaren] [link to this post]
 
No update here, it's probably staggered by area though I'd imagine
Standard User mikehiow
(committed) Wed 11-May-16 10:44:50
Print Post

Re: Superhub 3.0 Firmware update


[re: mlmclaren] [link to this post]
 
In reply to a post by mlmclaren:
Err yuck... Might well stick with SH2's then... How you finding the performance of the Hub 3 and is there more than 8 downstream channels locked or is it still using 8 for the time being?


I have 16 downstream channels showing in downstream status?

I'm new to cable, so yet to learn how it all works.

I don't think latencies are as bad as the graph suggests, however. Perhaps down to ICMP getting hit by the queueing stuff in DOCSIS 3 I've been reading about.

If you look at latencies via other protocols it seems to be much lower and much more stable.

Goodbye Hyperoptic. Now VM200 frown

Edited by mikehiow (Wed 11-May-16 10:45:17)

Standard User mlmclaren
(knowledge is power) Wed 11-May-16 12:01:43
Print Post

Re: Superhub 3.0 Firmware update


[re: mikehiow] [link to this post]
 
Yes I remeber my BQM's look similarly [censored] when I had one of the SH2 N.... I still hve one actually, its got a lot better though recently the amplifier in the cab went pop and need replacing and that seems to have fixed the issues with increasing jitter I was having.

16 downstream locked ay, I assume theres still only 2 upstream locked at this time... good to hear they implemented more channels immediatly, they network needs more room to spread the load.

Any issues with the WiFi yet?? & I assume it still has a guest network option right?

BTInfinity - 69000/20000kbps Formerly 116000/31000 - Quality Monitor - Quality Monitor 2
VirginMedia - 77000/5250kbps - BQM L1 - BQM L2
Standard User mikehiow
(committed) Wed 11-May-16 12:10:32
Print Post

Re: Superhub 3.0 Firmware update


[re: mlmclaren] [link to this post]
 
Yes, only 2 upstream.

No ideas about the Wifi, I'm using mine in modem mode.

Goodbye Hyperoptic. Now VM200 frown
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to