User comments on ISPs
  >> Sky Broadband


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
  Print Thread
Standard User deleted
(deleted) Mon 19-May-08 21:32:46
Print Post

Can any one shed some light on this.


[link to this post]
 
Got connected to sky in march as soon as the max was available in my area.

Initial tests indicated I would get a 3.5Mbps service.

Got Connected at 9Mbps which was great. Few at the start of the month i started to have issues with my SNR went from a happy 7 down to 4 and 3 and kept jumping between when i got time to check it out. Called sky and the a woman ran some tests and said my line wasnt able to support it and reconfigured the line.

Being a fussy so'n'so I called and got my line reverted back to how it was. So still had this SNR issue but tonight, I decided to reboot the router as the SNR was reading 9 and was connected at 9981.

Seems strange these changes in SNR.

Any thoughts?

Edited by deleted (Tue 20-May-08 00:58:26)

Standard User deleted
(deleted) Tue 20-May-08 08:14:07
Print Post

Re: Can any one shed some light on this.


[re: deleted] [link to this post]
 
Have you tried connecting your router to the test socket behind the master faceplate, with no other phones connected ? Your house phone wiring could be affecting the router performance.
Standard User deleted
(deleted) Tue 20-May-08 08:38:32
Print Post

Re: Can any one shed some light on this.


[re: deleted] [link to this post]
 
Try removing the bellwire too, it can act as an antenna bringing in signals that can adversely affect SNR. I removed it at my old house and nearly doubled my sync and had a much better SNR leading to a nice stable connection. If it makes no difference then it is an easy thing to reverse. Because my old house was in a starwired configuration I removed the bellwire from all phone points just to be doubly sure.


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Tue 20-May-08 17:20:39
Print Post

Re: Can any one shed some light on this.


[re: deleted] [link to this post]
 
At the moment the only thing thats connected is the router to the test socket on the master socket. lines purpose was solely for internet access
Standard User deleted
(deleted) Tue 20-May-08 19:21:49
Print Post

Re: Can any one shed some light on this.


[re: deleted] [link to this post]
 
The bellwire could still be introducing interference easy to disconnect to at least see if there is an improvement. Nothing ventured etc.
Standard User deleted
(deleted) Wed 21-May-08 09:40:19
Print Post

Re: Can any one shed some light on this.


[re: deleted] [link to this post]
 
If the OP is connected to the test socket, and there is no improvement, then there is either no bell wire connected or no extensions on the line, as the bell wires come from extensions so plugging in the test socket disables the extensions in most cases.

Also, if the line is just for internet access, it is unlikey to have any extensions on it, so bell wire removal not necessary.
  Print Thread

Jump to