|
|
Anyone got one of the 660 jobbies ? Whats it like, how does it perform on your line ? Can you post some stats, any special features, whats it like for disconnections on a Max line ?
TIA
Tim
Eclipse now ZeN
ST510v4 (4.3.2.6 CU Firmware) on 8 Meg Active
Check my bad boy speeds out on ZeN
Sign up for Latency Monitoring
Edited by Banger (Thu 13-Jul-06 03:07:12)
|
|
|
They are seriously rubbish in my experience. My A & A supplied one is sat on the shelf with a Belkin 7633 taking it's place
|
|
|
That's interesting. I did the exact opposite. Replaced my Belkin 7633, which was rubbish, with the AAISP 660.
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
Thanks for the replys, so far thats 1 each.
Tim
Eclipse now ZeN
ST510v4 (4.3.2.6 CU Firmware) on 8 Meg Active
Check my bad boy speeds out on ZeN
Sign up for Latency Monitoring
|
|
|
I have the 660HW. I don't do anything exciting with my connection, single IP, no port forwarding etc. and it's been a great bit of kit.
The only niggle is that it doesn't always seem to re-establish a connection if the line drops, e.g something strange happened with our power today and I came home to find the Zyxel had rebooted and had been up for 9 hours, but hadn't established a connection.
cheers,
Paul
--
paul <at> spamcop.net
|
|
|
The line concerned is long 60-62 attenuation depending on sync rate. The Zyxel acheived roughly 2500 sync rate at 6 SNR, but insisted on re-syncing when the SNR improved up to about 30 times a day.
I've got 7633's on other lines with similar attenuation and find them incredibly stable.
There's also the bonus of the SNR margin tweak which allows me to reach the 2500 BRAS data rate.
|
|
|
|
The 660s also have SNR margin tweaks, although I'll admit to not having tried it as I've got a fixed 1mbps connection (with Eclipse).
Something like:-
> wan adsl rateadap on
> wan adsl noisemargin x
There's also a
> wan adsl noisegt x
which I think allows for fine tuning.
Personally I've found the 660 very reliable with up to 3000 hours continuous ADSL connections using browsing, email, ftp, sipgate, skype, etc. /However/, when I was testing p2p for linux isos I found the 660 would periodically crash/reboot if a lot of parallel sessions were being quickly created and torn down. I've seen other people report similar problems. I've never had problems with sessions being recreated after dropping (although again this is with Eclipse and not A&A).
|
|
|
I have two lines, each with a 660, bonded at my end with ipcop firewall. Both lines have a attenuation of about 49db with a 4500/5000 BRAS rate. I find the 660 automatic re-sync up useful. The 7633 just seemed to keep re-syncing lower and lower. I also found the 7633 config options limiting.
|
|
|
Thanks for the info peeps.
Tim
Eclipse now ZeN
ST510v4 (4.3.2.6 CU Firmware) on 8 Meg Active
Check my bad boy speeds out on ZeN
Sign up for Latency Monitoring
|
|
|
The P660R's I've got have some problems, like randomly rebooting...
New firmware seems to have sorted it so far, but it remains to be seen how stable they actually are.
|
|
|
mines been stable from day one
ZyNOS F/W Version: V3.40(UH.3) | 8/10/2005
DSL FW Version:TI AR7 04.01.02.00
what vers firmware do you have installed on yours?
jZaw
Mac USER | Linux USER
PL ISP: 14M/14M KSM Zeork : WRT54gs<--wifi-->WRT54gs
UK ISP: 8M/750k AAISP : Zyxel P 660 R<-->WRT54gs : 1+4+64 IPS : 3GB cap : BRAS 7.15M
Zyxel P 660 R | two box static routing /32 /30 /26 | Talisman/Basic 1.1 on WRT54gs
broadcasting SSID | not MAC filtering | mtu 1500 | pingable, all icmp allowed
2 (two) * asterisk 1.2.9.1 | PAP2-NA | Dect | Voipbuster | Sipgate | Sipdiscount | Halonet | Easycall
SuSE 9.3 AMD 2000xp+ | SuSE 10.1 PentM 1.5GHz | Debian ETCH Pent 3.1 GHz | Xbox - xecutor2.6 - xbmc
OSX Tiger 10.4.7 | 1.33Ghz 1GB 12" G4 iBook 
|