home hub 3 advise please

After 10 years with AOL I have just switched to BT. I am getting much faster and more consistant speeds than with aol. My question is can anybody tell me how to get snr and attn and other line stats from the home hub 3. I had no problem with my netgear but cannot find a way to do it with HH3. Thanks .

I believe it's not easy to access the Modem stats.

There have been posts (have a look) in the Forum.

Understand there is a Firmware hack (if you are brave enough) to get access.

G3UZF. Thanks for that

They are wrong they are accesible, but don't have a HH3 around to describe how (accessed it on parents).

Needed to update the router password, since with default shipped one it would not let me. But if memory serves right, after doing that it was somewhere under advanced stats.

NOTE: Only applies to ADSL and ADSL2+ services.

Thank you Andrew.

Thanks again andrew. Your advice worked. For others info, log onto bthomehub.home, change your password, then got to advanced settings, then broadband,then connection.

I think what you are describing is for FTTC/Infinity customers.

It is on this page of the HH3 http://192.168.1.254/index.cgi?active_page=9116

You need to open a Browser and enter http://192.168.1.254 on the URL line

You will then have to enter your HH3 Password.

Npw select Settings/ Advanced Settings/ Broadband / Connection and click on the Show Details button at the bottom.

In reply to a post by Wheel_Nut:

It is on this page of the HH3 http://192.168.1.254/index.cgi?active_page=9116

You need to open a Browser and enter http://192.168.1.254 on the URL line

You will then have to enter your HH3 Password.

Npw select Settings/ Advanced Settings/ Broadband / Connection and click on the Show Details button at the bottom.

I dont have a "show details" button all I see is:

WAN Status
Connection Information
Line state: Connected
Connection time: 6 days, 02:07:44

Any ideas?

What Firmware version is your HH3 running?

At the bottom of each page you should see something like this:
Software version 4.7.5.1.83.8.57.1.3 (Type A) | Time and date 14:27 07/10/11

In reply to a post by Wheel_Nut:

What Firmware version is your HH3 running?

At the bottom of each page you should see something like this:
Software version 4.7.5.1.83.8.57.1.3 (Type A) | Time and date 14:27 07/10/11

just the same
Software version 4.7.5.1.83.8.57.1.3 (Type A) | Time and date 17:01 07/10/11

Settigs > advanced settings> broadband> connection....
.
WAN Status
Connection Information
Line state: Connected
Connection time: 6 days, 06:12:54

Thats all I've got

Are you on BT Infinity ? That would explain the lack of detail.

In reply to a post by Zarjaz:

Are you on BT Infinity ? That would explain the lack of detail.

Ah. sorry my mistake yes Infinity here. I misunderstood the thread from an earlier post

In reply to a post by nelix01:

I think what you are describing is for FTTC/Infinity customers.