User comments on ISPs
  >> BT Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | 4 | >> (show all)   Print Thread
Standard User epyon
(experienced) Thu 05-May-16 02:44:49
Print Post

Re: HH6 Incoming


[re: gt94sss2] [link to this post]
 
http://www.ispreview.co.uk/wp-content/gallery/2016-a...

this is it maybe?

it was used in the Gfast trials along side others.

Just need a BT stamp on it and away we go.

BT Infinity 2 - 80/20
BT Infinity 2 Speedtest
BT Mobile - 4G
BT Mobile 4G Speedtest

Edited by epyon (Thu 05-May-16 02:47:50)

Administrator MrSaffron
(staff) Thu 05-May-16 06:53:57
Print Post

Re: HH6 Incoming


[re: epyon] [link to this post]
 
Doubt that is the HH6 too industrial looking for the marketing people

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User PaulKirby
(fountain of knowledge) Thu 05-May-16 06:58:57
Print Post

Re: HH6 Incoming


[re: epyon] [link to this post]
 
In reply to a post by epyon:
http://www.ispreview.co.uk/wp-content/gallery/2016-a...

this is it maybe?

it was used in the Gfast trials along side others.

Just need a BT stamp on it and away we go.
That wasn't what I saw, but that looks nice, the one I saw showed loads of stats, like the Wi-Fi speeds, total bandwidth the device could handle etc, and that was way over the top for FTTC, basically it looked tailor made for a 1Gbps connection.

I looked in my browsers history, but it seems that Edge clears all the useful stuff and leaves all the trash yo don't want LOL

Paul


Register (or login) on our website and you will not see this ad.

Standard User PaulKirby
(fountain of knowledge) Thu 05-May-16 07:00:01
Print Post

Re: HH6 Incoming


[re: MrSaffron] [link to this post]
 
In reply to a post by MrSaffron:
Doubt that is the HH6 too industrial looking for the marketing people
Yeah I agree, it looked different than that.

Paul
Standard User Ignitionnet
(knowledge is power) Thu 05-May-16 09:25:50
Print Post

Re: HH6 Incoming


[re: PaulKirby] [link to this post]
 
Lack of wireless in that beast may also be an issue.

Standard User PaulKirby
(fountain of knowledge) Thu 05-May-16 12:39:19
Print Post

Re: HH6 Incoming


[re: Ignitionnet] [link to this post]
 
In reply to a post by Ignitionnet:
Lack of wireless in that beast may also be an issue.
I thought I read 1.7Gbps over wireless, or are you referring to the one in the link.

Paul

Edited by PaulKirby (Thu 05-May-16 12:39:57)

Standard User Icaras
(committed) Thu 05-May-16 12:42:00
Print Post

Re: HH6 Incoming


[re: PaulKirby] [link to this post]
 
I feel like this may be the Hub where they finally combine their 4G spectrum with their ADSL and VDSL products.

Also, this one doesn't HAVE to support G.fast. We aren't expecting a commercial G.Fast launch until this time next year or later. So they could easily bring out another hub after the 6 that would support G.fast.

Edited by Icaras (Thu 05-May-16 12:44:03)

Standard User PaulKirby
(fountain of knowledge) Thu 05-May-16 12:48:36
Print Post

Re: HH6 Incoming


[re: Icaras] [link to this post]
 
In reply to a post by Icaras:
I feel like this may be the Hub where they finally combine their 4G spectrum with their ADSL and VDSL products.

Also, this one doesn't HAVE to support G.fast. We aren't expecting a commercial G.Fast launch until this time next year or later. So they could easily bring out another hub after the 6 that would support G.fast.
I read it might be this one:
http://cdn.mos.techradar.com/art/TRBC/Routers/sagemc...


Paul
Standard User Icaras
(committed) Thu 05-May-16 16:05:52
Print Post

Re: HH6 Incoming


[re: PaulKirby] [link to this post]
 
Some way of using 4G to top up slow broadband speed would be a good idea.
Standard User BuckleZ
(fountain of knowledge) Thu 05-May-16 16:07:39
Print Post

Re: HH6 Incoming


[re: epyon] [link to this post]
 
I've seen it and it looks similar to this in size, its twice as big as the HH5

Pages in this thread: 1 | [2] | 3 | 4 | >> (show all)   Print Thread

Jump to