Hi
Note i just clicked reply to a random edit tab and personally dont mean to a specific user
once i see more reply's and THANKS for that are all welcome ... was estimating speed before the checker update 11-19mb (older version)
TT was claiming 14 mb (when singed up)
my modem stats from a draytek 2850n is below
Note usually draytek is synchronizing with 15.000 (same as the dsl 2680 TT supplied modem but i have seen both go and up to 16.000 untweaked both just the draytek can take some other firmwares codes for compability and is not tweaked firmwares as they dont tweak their modems like billion 7800 )
but last night (not sure if the snow or weather changes cost to make any changes) so got about 5 disconnections (with the draytek) where at this rate 13.000 stayed very stable with no drops there after
ADSL Information ( ADSL Firmware Version: 211011_A)
ATM Statistics TX Cells RX Cells TX CRC errs RX CRC errs
170353 11158707 0 5865
ADSL Status Mode State Up Speed Down Speed SNR Margin Loop Att.
ADSL2+(G.992.5) SHOWTIME 1019968 13008708 10 36
Telnet stats before the 5 reboots
http://i1167.photobucket.com/albums/q631/babis3g/tel...
Use fast path and SNr set at 9db, loop attenuator 29 (the current loop 36 is because i am using a different draytek firmware modem code that suppose to make little more stable the 2850)
At TT LLU is infineon and 2850n uses ADI chippest which seems fine with TT equipment
I have also tested a billion 7800 (unteaked) and getting max 14000 broadcom and an asus N55U (untweaked again) which also getting 14000 maximum Ralink)
Connection EO exchange direct (no cabinet) at 2.400 meters away (told by BT openreach engineer when done the instillation
Here my exchange
http://www.samknows.com/broadband/exchange/CLKEN
It is 21cn enable and apart the information i have posted (about stats and different modem info i have tested) just for education reasons ....
my question for posting again is
How will understand if i am connected all ready with 21cn??they do automatic?or TT has let me out and forgot me?
sorry for silly asking still learning few bits
Thaks
Edited by babis3g (Mon 14-Jan-13 17:42:38)