and that time seems to be much more than a few hours.
I couldnt run the BTw tester this morning about 10 hours after I ran it last night.
Remember in another post I mentioned to you about the power?
Well initially my line had 6.6 TX power with the 36mbit attainable upstream
Then it dropped to 5.8 with 24 attainable
Now its 6.1 with 29 attainable (Was 32 initially).
Also looking at my bitloading I can see the power output has been dropped on my D0 range, same QLN as before but now less power transmitted, so it seems DLM is fiddling with the power masking I assume to manage crosstalk.
So I think the power was increased 3 nights ago, I had temporarily a higher sync for 2 days, last night for about an hour I see sustained packetloss on my tbb graph, this may have triggered excessive errors and DLM maybe reduced the power again this morning. delay depth, inp etc. not touched still fast path.
I only used mouselike again because the BTw tester wouldnt work. I will try the BTw tester again tonight. The speedtest works but the page that shows the profile fails. It seems if I am right the BRAS updates without a ppp reconnect (after new sync), and the ip profile which is a set a bit lower than the BRAS is what updates (and what the BTw page shows) on a new ppp connection.
BT Infinity 2 Since Dec 2012 - Estimate 65.9/20 - Attainable peak 110/36 - Current Sync 71/20