BT Wholesale Diagnostic Test

Are we all getting fed up & tired of kept doing first page test before next page to do a further diagnostic test to get your ip profile?

Well, not anymore, you can ran BT Wholesale run diagnostic test straight away to get your ip profile. Please note: Speedtest throughput isn't correct. Use a normal BT speed test here: http://www.speedtest.btwholesale.com/

Quickest way to check ip profile here:
http://www.speedtest.btwholesale.com/PerformanceTest...

Edited by adslmax (Thu 23-Jan-14 15:43:07)

Thanks
Only one problem
Downstream test is fine but upstream test gives this result
Upload speed achieved during the test was - 0.01Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
I would be interested if others see the same effect
I will run it again in 10 minutes to check

Second run through and the same silly result

Edited by Oldjim (Thu 23-Jan-14 13:03:55)

Maybe we just ignore the throughput speed. Only use this test to check ip profile quickly. For a real proper throughput speed use this one instead: http://speedtest.btwholesale.com/

Edited by adslmax (Thu 23-Jan-14 13:07:57)

Same silly result here too

Now it says

Test Error

You must wait 10 Minutes between tests.

Well shiver-me-timbers. That's great. How did you find that?

One oddity, I just did it, then ran via the normal quick test:-

Direct:-

Download speed achieved during the test was - 46.41 Mbps
For your connection, the acceptable range of speeds is 46.01 Mbps-57.51 Mbps .
Additional Information:
IP Profile for your line is - 57.51 Mbps

Upload speed achieved during the test was - 0.01Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps

Normal

Download speedachieved during the test was - 51.88 Mbps
For your connection, the acceptable range of speeds is 46.01 Mbps-57.51 Mbps .
Additional Information:
IP Profile for your line is - 57.51 Mbps

Upload speed achieved during the test was - 11.58Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps

Speeds presumably variable due to it being via wirelss, but look at the upload in particular. That's unlikely to be a wireless effect.

Yes, I had to leave mine in mid-reply, in order to get the Further Diagnostics, so didn't see any posts since the OP. Need to retry the downstream comparison, wired, some other time.

Edited by RobertoS (Thu 23-Jan-14 13:17:25)

Yeah, I understand what I'm seeing now, just the IP Profile - the speedtest bit is irrelevant (as always).

Nice find Max, presumably Doris told you about this?

Yep, just for IP Profile quick check (ignore any speed throughput)

I try to work out how to get it spot on. Bear with me until I sort it out.

Yes, I get precisely that response as well.

Running the TBB Test gives me an upload of 1.04Mbps - hence I don't even understand how the IP Profile of 0.83 could be right!