Technical Discussion
  >> DSL Hardware Discussion


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
  Print Thread
Standard User deleted
(deleted) Tue 13-Feb-07 00:38:49
Print Post

Can I get any faster?


[link to this post]
 
I'm currently 'on the edge' of ADSL. 59fb Attenuation 6-9db SNR Margin
I'm using BT Businesss Hub (2wire 2700HGV) and syncing at 3360.
Left it connecting for 3 days and my BRAS is reported at 2500

Is there any bit of kit or tweak to reliably try to push my speed up? I have a spare ST585v6 (AOL) I got off ebay for

Edited by deleted (Tue 13-Feb-07 11:28:40)

Standard User deleted
(deleted) Tue 13-Feb-07 09:18:59
Print Post

Re: Can I get any faster?


[re: deleted] [link to this post]
 
With 59dB attenuation, you are doing pretty well to get these speeds. Your line must have a low noise pickup. I doubt whether you could improve on what you have unless you move house.
Standard User deleted
(deleted) Tue 13-Feb-07 11:27:47
Print Post

Re: Can I get any faster?


[re: deleted] [link to this post]
 
Thanks. FWIW I tried the ST 585 v6 and out of the box it synced at 2700. A different BT Business Hub synced slightly faster than my current one at 3424. So I might be swapping them over. They are litterally plugged into a DSL filter which then goes in to NTE5. I have no other wiring/extensions in the house. Will a fancy faceplate be any benefit if there is no cabling in my house?


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Tue 13-Feb-07 12:39:22
Print Post

Re: Can I get any faster?


[re: deleted] [link to this post]
 
Belkin 7633' wireless routers are well known for having excellent ADSL modems in them, I was able to get an extra 1mbit on my profile over a cheapie connexant based router.

I also had further success with a TI chipset router, got me another 512kbps on the profile, probably because my exchange has a TI dslam.

Pete
  Print Thread

Jump to