Forum Index | Search | Register (New User) | Login (Existing User) | Who's Online | FAQ | Main Site

Technical Discussion
  >> DSL Hardware Discussion Previous thread View all threads Next thread


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
  Print Thread
Standard User deleted
(deleted) Fri 18-Jul-08 19:23:52
Print Post

WDS between DG834N and Home Hub


[link to this post] 		 
I'm trying to set a Home Hub as a repeater to my existing wi-fi network. The main router is a DG834N, I have set on the Netgear as a point-to-point bridge and entered the MAC of the wi-fi for the Hub. In the Hub settings I have added the Netgear to the list of WDS enabled access points. However, WDS does not seem to be working. I have tested by placing the Hub halfway across my house and gone into a room with poor reception (which is at the opposite side of the house to the Netgear), if the Hub is on or off, there is no difference in signal strength and quality. Help.


Do I need to have both on the same SSID? Disable DHCP on one? etc.

Edited by deleted (Fri 18-Jul-08 19:25:34)
Standard User yarwell
(sensei) Sat 19-Jul-08 17:31:55
Print Post

Re: WDS between DG834N and Home Hub


[re: deleted] [link to this post] 		 
I would expect you need to have the Netgear in some sort of client mode not point to point otherwise nobody else can join the party.

Phil

666 kbytes/s with Demon predominantly over fibre

MaxDSL diagnostics
Get all this Microsoft Lame! stuff off my PC !
  Print Thread

Previous thread View all threads Next thread
Jump to