Technical Discussion
  >> DSL Hardware Discussion


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User deleted
(deleted) Sun 07-Feb-10 22:33:55
Print Post

Re: ADSL Modem needed


[re: Apprentice] [link to this post]
 
From this line stats post your modulation is G.992.1 Annex A ..... better known as G.DMT, i.e. ADSL.

It's not ADSL2 or ADSL2+


So is it that i cannot get ADSL2 then or am is it my exchange that wont let me have it or have not got it

S43 1HG Post code Chesterfield eschange???

Andy
Standard User deleted
(deleted) Mon 08-Feb-10 11:44:23
Print Post

Re: ADSL Modem needed


[re: deleted] [link to this post]
 
You should be able to get it from your exchange. Don't know about you ISP.

See "SamKnows" site:

http://www.samknows.com/broadband/checker2.php
Standard User deleted
(deleted) Mon 08-Feb-10 12:51:47
Print Post

Re: ADSL Modem needed


[re: deleted] [link to this post]
 
In reply to a post by mark_s_lewis:
Can you check the firmware version on your 780WL? As mentioned by the previous poster, the 780WL is definitely compatible with ADSL2+ (both Annex A and M) at firmware version 6.1.4.3, since I have used one at this firmware version on an ADSL2+ line. If your main reason for buying a new router is to get ADSL2 support, and you can get this by simply flashing the firmware, that would certainly be your most cost-effective solution.


Mine is 6.1.7.2 But i think i have been reading something wrong and i cannot get ADSL2 Sorry.. I will have a look though and see if there is a new firmware to update it to and make it more stabler. thanks

Andy


Register (or login) on our website and you will not see this ad.

Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to