help need to reduce attenuation of 63.5db

is there any way to improve this? ive run a line in cat5e from the master sockets test socket, it then feeds a single Xf-1e filter which connects to the modem via a belkin shielded adsl cable and a panasonic dect phone. the modem is a billion 7402nx. is there anything i can do to improve things eg. better filters?

heres my total stats using a z-420:

DSP Firmware Version E.25.41.55 A
Connected true
Operational Mode G.Dmt
Annex Type AnnexA
Upstream 448000
Downstream 1920000
SNR Margin(Upstream) 16 dB
SNR Margin(Downstream) 5.0 dB
Line Attenuation(Upstream) 31.5 dB
Line Attenuation(Downstream) 63.5 dB
CRC Errors(Upstream) 2240
CRC Errors(Downstream) 20
Latency(Upstream) Interleave
Latency(Downstream) Interleave

Edited by deleted (Thu 11-Feb-10 12:20:29)

If you're certain that everything on your side of the NTE is good then your only option is to move house.

In reply to a post by Deadbeat:

If you're certain that everything on your side of the NTE is good then your only option is to move house.

Or get broadband from cable, wireless, or 3G - if faster and coverage in your area etc.

(3G may give higher upload than many ADSL/cable providers!).

ive got BT comming on Monday to sort it out. i checked my neighbours stats, and hes getting 54db.

You haven't got a filter connected before the NTE-5 have you? It would look like a small white box.