Technical Discussion
  >> DSL Hardware Discussion


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | (show all)   Print Thread
Moderator billford
(moderator) Fri 17-Jun-11 14:31:04
Print Post

Re: Billion 7800N IPv6 Tunnel Configuration Help


[re: knightnet] [link to this post]
 
In reply to a post by knightnet:
Inbound, I can ping the router but can't yet get anything inside the network. I've put an any/any inbound IP6 rule into the router firewall and tried turning off Windows firewall but still no joy so I've a bit of work to do to solve that one.
I had that problem, I was helped out here:

http://forums.thinkbroadband.com/dslrouter/t/3998651...

It works, obviously I'm running fixed IPs on the iMac.

~~~~~~~~~~~~
Bill

[email protected] _______________Planes and Cars and ..._______________BQM & Speed
The author of the above post is a thinkbroadband moderator but it does not constitute an official statement on behalf of thinkbroadband.
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to